ERABBIT

.....on the side of the downrigger should be a cut out grove for the counter to slide into........... #19 gear goes on the shaft below the counter I can't get a clear picture of that but if you look at the diagram on the part link above your get the idea !!!

and #19 , the first two go together then 19 on the downrigger shaft !!!

you'll need part #20 and #21.............you lucky mine went nuts durning the derby and I had to bring it up by hand, then took it off. It already has a counter on it white base...........if the unit died all the way you can change out the on/off button with a up and down switch , just check the wiring diagram off this site for the part............. http://www.fish307.com/mag10a2006andolder.aspx

Noonish on 6-01-2011 took and sent pictures of transducers to HB.......no reply YET !!!!! 6-04-2011 new in the box transducer bracket came in the mail ( same as the cheap , cheesy one that broke).

......

Posted a few days ago !!! viewtopic.php?f=2&t=24719 Welcome to the site.

I think he's referring to the LORAN C system...... http://www.navcen.uscg.gov/?pageName=loranMain Stay with a GPS system and you'll be fine.................I upgraded last winter from a gray scale to color......all I can say is WOW color is much easier to see !!!

Searched your unit on : http://www.lowrance.com/Community/ that's the part number I found........ search the part # and you'll find many places to buy it or search for a lwrance dealer and call them with you unit info.......

Transducers (192 kHz / “BK†Black Connectors) 90-73 HS-WSBK (20ft) Fits 1240A-BK, X22A, X25A/B, X28, X29, X38, X45, X48, X49, X55A, X65/75/85 SAMST, LMS160, LCG2400, Accura 240, Magna III, Optima, Strata 128, Ultra III, Ultra Classic, UltraMap, FishEasy, Silver Striker, Status. (Uses 99-06 transducer brkt.)

Mark I fish by myself a lot also. I like to use this time to work out any bugs in my game. Like when I got my first wire diver rig I fished it by myself till it felt like a part of my game. Personally I like to run just rigger and spoons when fishing alone............. P.S. I only fish alone on the finger lakes not Lake Ontario

Main page here left side look for "Fishing Tournaments" 6 one down..........

Wished I knew that.... I would have called ya every hour !!!!

Just got off the phone.......... .......that was fun !!! Over 20 minutes on hold listening to the same SH*T over and over. .....get a real person hard to understand repeat and asked them too also...........give my name so they know about me ????....after bracket is addressed I'm asked for my mailing address ???? that they should already have ???/....... anyway they are going to mail new braket to replace the "CHEESY" one that broke ( wonder if this one will also be cheap) , they want me to take pictures of the transducers on back of boat and mail them to this guy and see if they can figure out why I still have a small roster tail...............more to come ............

E-mail sent on : May 25, 2011 2:25:39 PM HB reply on : May 26, 2011 5:58 PM They answered the "roster tail" question..........nothing on the bracket breaking.......this was off their site where I have both units register. They have ALL my info and I was told to CALL Customer Resource Center at 1-800-633-1468 to speak with a Customer Service Representative. I don't like calling on the phone because I can't hear that great................calling now see what happens...........

....GREAT !!!!!!!

The guy was in camp this weekend , I talked to him yesterday before he left. Said he would be back Thursday.........price was jumping around from $3.50 to $5.00. He also told me the guy that makes them sells them on the internet , when I told him you were looking for 10 or so he said he could work or a deal..............so we'll see what he has to say when he come back !!!

I'd PM skipper19 or asked the guys that don't like them if they want to sell them !!!

viewtopic.php?f=3&t=10242&start=0

......COMPUTER broke.................... ...............good to hear you got power back down there !!!!!

Out for the derby today , I forgot to say the sub-troll quit on me yesterday.................today out of the gate the TrollMaster messed up could not get it to cut back only wade open.................we went 11 for 14 today 9 lakers , small land lock and a rainbow. All spoons...............then my digi troll II went nuts looks like a crazy clock had to bring ball back up by hand !!!!! ....... ......came back in and Carols puter sh*t to bed also !!!!

We got back out today , I had those plugs put them in it cut the rostertail down a lot but still have one hitting motor half way up on the housing............adjusted the deep salt setting ( after loosing bottom again ) on the way back across didn't find it at first got the book out needed to be in advanced mode work fine then.................went 4 for 4 on lakers nothing big 20" to 24"ers.....

Chris , sorry about HI-JACKING your thread above .............. I just got off the phone with Barrett Marine 485 West River Road Waterloo, New York 13165 Phone: 315-789-6605 or 1-800-924 I talked with Fran he said IF you remove all the rope and stuff so it's 100% clean shrink wrap they would take it ( no charge)

Thanks guys............good info Bobber Thanks , I contacted H.B. yesterday by e-mail off their site not answer yet on the braket breaking..............I wish I had check better on this before I went with them didn't relize that Johnson Outdoors own them. The way they ditched the parts for older Cannon riggers still does not set well with me...........I know some on here say hey it's a "NEW" owner and they are supporting what they make NOW...........I say they BOUGHT the name with the GREAT support they had in the PAST so CHANGE the name and do what you did !!!!

P&C with spell checker = Pig & Cow................

2nd shake down , talked with jason and indian was also out there..............picked up on LL about 17" misse some thing in the same area. The fished west side for a bit picked up a small laker.......all spoons long leads 17' and 40' down.......changed out battery while I was out there and hooked wiring up for sub-troll............lost bottom reading with the Hum'nbird out over 520+ feet bout came back......worked Ok on trip back across...............then ready to call it running big motor two rostertails from new transducer...........got back in and found the 200/83 transducer bracket BROKE....cheesy plastic..........bolt goes thru with a allen head one side plastic insert on the nut with built in not holder.........I think when I used this to tighen down the transducer it stressed it and broke/craked under pressure but did not have enough pressure to flip it up..........