ERABBIT

Try this : http://www.wtv-zone.com/riparian/spoons.html about 1/2 way down...................

Looking foward to your report

WTG Rodney...................

.............. ..................

Ok , got it !!!!......

Nick here that rainbow I told you about the other day , I think it was 9" from the top of it's back to bottom of it's belly a bit over 9#s. It came out of the water three times what a show !!!!!!!

Tim on another board guys are fishing deep and went to 125# for rigger wire smaller dia.= less blow back also use braid on the rigger rods same reason. I have not heard any on them putting there probe that deep thou. So yes 135# would be OK but with the extra stress of the probe ( and the cost to find out) .......................

http://www.simrad-yachting.com/Downloads/Manuals/ Simrad bought them out so......................

http://www.navico.com/en/Contact-us/ Not sure but try that link.

Willis knot , I use a needle too thread it into the core then tie the knot . I tie two knots with braid

http://www.nysparks.com/parks/12/amenit ... ities.aspx site for Fairhaven, I was only there once last year they have docks/slips not many I was told they were first come deal but if you were there over night they would chagre you.................I could not fine any of that on the site other than they have "Dockage" Dockage We kept the boat at the site and launched each day.

yep mine a few weeks ago also..................

Tuna's Reel Troubles e-mail [email protected]

I use it with a blacks release and add a crimp just in case. I tryed a few differnt ways 1st was to srtip wire of coating but I would lose signal around 140' or so. Then I tryed slipping a srink tube over it and sealing better with that..............that worked OK till it started to beak apart.................next I made knot and burned coating off , that was a pain I did get all the coating off and would not work then it would............... I think the best would be too just strip a small area where you think the knot will end up...............the other bad deal with the burning off the coating is the wire will start to rust alo causing signal lost.................

http://www.esgdirect.com/trolling.html scroll down they have 300' @ 150# test......................200' down with probe = a LOT of blow back

lakebound88 , I'll take the 2 low profile if he don't...........let me know.

WTG thanks for the report...............

Great job Eric looks like you got him hooked for life.....

nice !!!!!

Here is the 788ci Manual in a pdf file you can down load to see what it can or can't do. http://store.humminbird.com/media/docum ... Manual.pdf The maps that come with it a not that great I already had a Navionics HotMaps Premium 2008 East and a 2004 Gold the detail there was what I called great in my first post. I was able to down load my way pionts from my Eagle on a SD card down load a program from Humminbird web site and load these back into my 788ci at no charge orther than the price of a SD card.

Cableas had the 788ci on sale for $499.00 not sure if they still are I picke one up and with my map chip it is GREAT................in the living room ..........have not installed it on the boat yet........check this link if your interested may still be on sale................ http://www.cabelas.com/sonar-gps-combos ... bo-1.shtml

Web page to download manual if you need it YT. http://www.retrevo.com/support/Raymarin ... dj883/t/2/

How's this look ?...................... Super Slim SS1915 Hot Dolphin(Green) http://www.dreamweaverlures.com/dwstore ... phin-green

Done............