Jump to content

ERABBIT

Members
  • Posts

    3,513
  • Joined

  • Last visited

Everything posted by ERABBIT

  1. LOL , about 15 years ago it was stuck in the mud some how down 200 feet on Lake George....
  2. Got out this morning with King and Carol , set up out front trolled to just above Severn and turned and came back. When just a tad into laker land....changed many spoons , depth speed gamble rig ....said I was throwing out my old dodger peanut now that it was pushing noonish and we were cooking in the sun........ after a bit rod popped Carol let me take it played it in ......skunks gone today !!!!!
  3. Good deal.....
  4. Nice.....
  5. sound like the shot stop board is shot , you ccan replace that or order a 4 prong and it will work but no short stop
  6. short stop ( I posted auto stop ) is three prong non short stop is 4 prong
  7. did it have auto stop ? if so new switch would not help if auto stop board failed.... or you bought a auto stop switch for a non auto stop unit
  8. Just checked still the same.... any decision made yet ?
  9. Thanks Ray , I am getting OLD but like you still young at heart
  10. Im not 100% sure but leaving it out some are you not taking a chance it would work free from the steel shaft and the spool could just "free spool" ? When I had them I took another piece of bare wire sild it in the hole from the allen screw and held it in with a pice off a swim noddle...
  11. VERY nice report Nick..... We got out yesterday very late 2pm , fished east side ran three spoons , turned and came back with two gamble rigs , had a fair screen , never moved a rod...... keep losing i-pilot signal , I think it was all the pollen from this spring before I had a roof on ( hope that it ) quite around 4:30 pm...... got to get out later or earlier to hot....
  12. Pro member to sell , Pro member to buy.....
  13. Its been a long time , we stayed at the Golden Horse Shoe , big spinner baits were hot
  14. I have a HB 798 tied into my terrova/ipilot/link also the lakemaster chip. Still figuring it out lakemaster contour lines are not to close to the real depth....... using it that way tied to the IP that is all you can use it for at that time. Do you just plan on using the two for that ? If so it sound like a good deal. The 788 transducer were junk when I bought mine a few year ago work for awhile then crap out.
  15. Ok , I'll pm you a phone # .
  16. 75 82 85 also have some of the 2000 but wore them in the rain and whatever may not be good enough but you can decide. If your are going to display them in a public place with a note of credit for my buddy that gave these to me over the years you can have them..... if not I'll keep them....
  17. Take circuit test meter set to check continuity , touch the steel shaft on the rigger spool , touch the steel on your klincher..... if circuit is complete your short stop is shot......
  18. haha did the same search found it on facebook'''' picture of the winner on there as well https://www.facebook.com/ssmonowascolake/
  19. WTG ,
  20. Good luck !!!
  21. REEL MEN don't read directions......
  22. Back in nice boat ride Carol , King and I had a good time fish didn't want to play..... surface temp west side 62.5 to 6e * down 30' ,55* lots of buttonball crap but in scum lines mainly a few floating weeds and green scum down 40' , 51 * Kinger jumped in the lake when we got back guess he was a tad hot.....LOL ran three spoons to start out from 35 FOW out to 56 FOW changes spoons went out to 75 FOW then 100 fow turned and headed back too camp went out in 150 fow of water dropped two spoon riggs and a sd off the riggers , put another sd on the slide diver wire rigg.......... put the I-pilot in messed with that awhile got the bugs out then hooked to HB fishfinder with lakermaster chip following contor line..... we both got a head ache getting it to work but finally did , hope Kinger was watching rods......LOL Pull things up and went in fun day !!!!
×
×
  • Create New...