ERABBIT

to bypass you need a 4 wire switch and a short jumper wire of the breaker............. this will cause you fits , it will start kicking out your breaker taking for ever to to bring it back up.......Screwy Leuy has short stop boards ....... BUT you have bigger problems that just that...... I had thought about filling the gear housing with grillia glue and drilling it back out but found housing in the mean time....

Three wire switch ?

I ran the 91 in my 1988 before all the time , also in lawnmowers.............. Just wondering about my 4 stroke ?????

I got gas at Fastrac in Ovid the other day and ALL the pumps 91 o were non-E ......4.20/ gal

Jim Bator , low bridge so don't have your jigging rod sticking up to high before you pull out into the lake..............we'll be waiting to read your report GOOD luck and have FUN !!!!! I've done some jigging and lots of trolling , last two years I went to a lighter reel with my spoon program with lite rods........the fight is as good as jigging BUT you don't get the WACK fish on that you do jigging...... now I agree a 22" laker on a dipsy or flasher fly rig will not show you what he has like he will jigging BUT on just spoons it a good fight !!!!!!!

Wes if it wasn't so hot and I didn't have so much stuff going on at home I'd have about 10 to 14 more days on the water this year..... ......JK .....it's been a fun season again browns are going great again this year and I'm not into the landlocks like last year , some time I'll pull it all togather..........

We were Marty! I was working solo today with two clients, nice report Ed I figured you were on your way to your hot spot . We smoked them good out deep lots of Lakers one that was 10 another that was 12 and four good Bows. You didn't miss a thing early the fish were off the bite, once the sun came out and the lake layed down they were on fire. Kinger get BUMPED ha !!! he picks his seat we take what left............. Sean the was full of weeds but they never stay HOT for long anyway.... just have to find them some where......... thought your spread looked a little weak only 20 or so rods out .....

Seneca 8/9/2012 Late start today my better half is on vacation and has been putting in 60 to 70 work weeks so we hit the water after 9:30 am ran south,,,,,, at Reel Hooked Up as we went by them......... set up about where we started the other day but trolled north........ not much going on weedy in that area cleaned rods a few times and the water was a tad warmer at 61' today.......switched some spoons around and hooked up with a laker down 71' DW wonderbread glow.........picked up a small laker at that depth and changed some more spoons............then picked up a nice brown at 61' DW SS alwife type , .....now the wind has stopped and it's HOT .......picked up a brown on the 71' rig and called it a day about 11;30ish.......the TIE still LIVES........ .........put every thing back today .......the bogo-grip ($$$$) was worth it both browns were in GOOD shape as the swam away.......thanks Wes and everyone else that bragged these up..... other wise I would have never dared take a picture......Oh it work great yesterday on that SMB also.............

Nice job Nick......

Thanks Nick, I think the browns are going to be on fire like they were a year ago in August just have to RUT them out..... time will tell......

It was over 5 Dave FAT the biggest one I ever boated !!!!...........I taken some 19" out of here but this one was more than that........two quick pictures and back in ..........moved him around a bit with the bogo-grip and he was ready to take off !!!!!!

May not just be your speed browns and LL like it warmer........

Thanks guys , We ran south watching the weeds as we went didn't look REEL bad so after a bout 5 to 6 miles we set up going south..........that didn't last more than a 1/2 mile ran into thicker weeds so spund around and went north..........picked up two short browns , then banged a big smallmouth, three lakers lost some thing GOOD fish we never saw picked a 5+ # brown, boxed a thrid laker , lost a HUGE brown at the back of the boat and boxed another brown around 20" was in the weeds again so we just pulled last line and called it a day............... mix of spoons but UV was hot after the sun was hi today , 71' for the lakers and the last brown , 51' for the 5# brown , 61' for some small browns that big smallmouth and the huge brown ........all spoons , all rigger only three rods........lazy for sure !!!!!!! .......but it was fun.............. I'll get a picture or two up later.............. Ok here ya go.... the tie is a NAFC thing I'm hosting it for this month , when I got it out Ron looked at me like ...W DA heck is that ????? .....

Seneca 8/8/2012 Been a while coffee is on now still have to uncover boat and wake Kinger up . Then we will be giving it a go with Ron from the park when he comes over ..................

No not yet , starts 10/01/2012.

5 now....................1 as soon as the new lisence starts 10-01-2012 !!!! Oh that is only in the western Finger Lakes..........

Well thanks everyone , I finnaly got around to taking care of this. ( It was getting real hairy if it would start OR NOT ).........pulled started took to Barrett Marine.......Fran pulled it apart lots of gray dust came out , brushes were SHOT a long time ago said he had no idea how it even started............he cleaned it out and replaced the brushes , I picked up 6 plugs and 2 inline gas filters total $116.00...............a new starter is $340.00 + taxs.............. after a few issues putting it back on changed plugs and inline gas filter ( and replaced adjustment arm on carbs............someone broke one with a screw driver ) all back togather and ready to go............

I got back up today , took it off and ran it up to Barrets.....Fran tore it down clean it out and replaced the bushing.........got plugs and a iline gas filter that's on the side of the motor.......back at camp after second try got it back on motor gave it a quick turn over cranked GREAT......insatlled new plugs , change gas filter BUT scew driver slipped and broke plastic arm for carb syc....................back to Barrett talked with Fran how to adjust all three picked up extra link just in case I break one again when I change out gas filter...........back to camp followed Frans directions...................geeessshhh good thing I got the extra one because just loosing the scew on the lower one it also broke..........got them in fire up motor............it OK but still not a 100% start hard runs fine , shut it off , go to start it back up have to mess with gas to get it to keep running.....OH well been like this for a while I can live with it...................

Will this work on my boat -NFB Rack single-cable system. $950 installed on my rig ???? If so when can we hook up !!!!

Marty where did you give it a go at ????

Love that second pic......

Unless you have a change over in wind one side or the other should be WAY better weed wize....... ssw for a day west side should be GOOD But not around Long Point it will take a while to clear that area out on the north side kind of like a fan pattern as that wind passes the point it moves in, then comes a n or north west wind plugging up both sides on the first day then clearing out some of the east side , ...... I feel your pain it's gets at times , that's why when I fish alone I try to keep it as smiple as I can........but then I'm smiple anyway......