L&M

Welcome aboard C-C alot of good guy's and info here. Add your own.

Welcome aboard Zern. Where in Wayne county?

Have a happy Rick

Welcome aboard luv2.

That's debatable.

#1 Welcome aboard. #2 This discussion has had many opinions on here. Here is the latest one. Hope it help's out some. viewtopic.php?f=3&t=7602&p=52656&hilit=down+temp#p52656

J&B's Road Troller Has a ring to it.

Great looking rigg Sean. You put a lot of time and thought into rigging it.

Your right John. If it's the outer end of the exhaust bellows it won't cause a problem.

Have a good one Gambler

Who is that guy Give me a call Steve.

Walleye: Read thu this tread. It will give you a little more info on what has changed. viewtopic.php?f=21&t=8685&p=46647&hilit=Reynolds+Game+farm#p46647

OK Thanks. I was just wondering if he had a problem with it or just didn't like it. Thanks: Jeb

Why is he selling it?

That's a hard ? to answer. It depends on what the surface temp is as well. For right now I'd say 25 ta 30. I'd be a bit nervous unless you do what I said above. Bottom line if you have no way to drain it or get power to it. I would say it's early yet. There are still going to be some good cold nights. Especially where you dock it. It was only 17 here this morning.

If your near power so you can rig a light or two under the deck for some heat incase it does drop down again. Or drain the block and manifolds after you use it. You should be ok.

Pat: Is it an i/o or outboard?

Shuu Mark

Bad Habit: All the above are excellent replies to what you are doing. The only problem you may encounter is with the depth raider and interference. It is recommended that the wiring from the D.R. to power source be run on a dedicated fused line directly to the battery and not to a multiple fuse block as you indicated. I have seen 1st hand that this holds true on several installations I have seen where there have been problems. Just a FYI is all.

Welcome aboard b-f.

Ray I can assure YOU that no one here Mod's or Add.s have deleted anything the you have posted here. Especially but not limited to the last 48hrs. If you want a screen shot of the Moderater logs I can supply it to you with no problem to backup up what I say. Best I can tell you is to try and repost you Key's report again. There could have been a glitch in the system or on your end when you posted it.

Good job Stan.

Welcome CC. Good to see you here. Do some reading & feel free to ask questions. Enjoy

It souds like you have a short in the wiring in the leed to the motor or it's the moter it self. Does the prop on the trollong motor turn freely by hand?

Top diagram will give you 24v. Jumper from + to - and trolling motor leads to the remaning + and - terminals on the batterys. http://www.trojan-battery.com/Tech-Supp ... agram.aspx