Jump to content

Fishstix

Professional
  • Posts

    1,251
  • Joined

  • Last visited

Everything posted by Fishstix

  1. I was talking to a guy a couple weeks ago who had just installed one . He said it was unbelevable. Turn it on with factory settings and go. Price of the 1871 is tempting. I currently run a old 582L that still works fine.
  2. I bought a couple TLA100MH2 . I will get a fine tooth saw and cut them off. Actually my kids got a pretty clean cut on my spinning rods with the trunk of the car. Might do that . Thanks for the many replies....
  3. This has probably been hashed out here before but I just purchased a couple Talora diver rods. I had a couple heartlands with twillitips many moons ago.Then I switched to Okuma rollers about 10 yrs ago. I am now switching back to twilli tips , Ive been sitting here looking at these new rods and reading where guys can not get the tips off or end up cutting the end of the rods off.. I have also been reading that using 19 strand wire you do not need a twilli tip.I use my diver rods a lot. If I bought 19 strand wire do I have to cut the tips Off? How is the 19 strand for fleas.? Ive got the twilli tips already.
  4. ttt
  5. The annual outdoor show is this weekend . They do not advertise much but really pack em in. It is located at the high school between Spencer and Vanetten on RT 34. Bring the kids lots to see and do. Google Spencer Vanetten outdoor show for more info.
  6. Ive got one make me a offer.
  7. Good mix covers all watercolors.Nils masters are great in the fingerlakes .One of those jointed rebels put a 3rd place brown in a spring LOC derby. Used not abused. ttt 21 total $70 shipped or BO
  8. sstout You have PM I got your PM.
  9. When I get that extra weight out of the boat I will be runnin like those bass guys.
  10. You are right .I have been getting rid of stuff. I set up a account on Ebay and paypal it was kind of a pain and they are still holding the money for everything Ive sold. 21 days they dont tell you about. That being said If we could get together I could put that on ebay for you. 

     Just as a arima friend

    Check out Furuno FCV 667 Ive got two on Ebay .Getting some interest.

    Stan

  11. Hope to see you guys at the weigh station.BTW we should have a LOU channel on the radio. Just for a little ball bustin and spreading fishing info......like whats working....what aint... where you at... how deep... how many .. how big etc. fishermen never lie so there should be a lot of good info. I know this year I will be running some stuff I never ran before
  12. I had this mounted on my Trophy boat back in the 80's. It worked great. This is a remote control that turns the wheel to the left or right depending upon which side of the button you push on the remote control. I would carry the remote in my pocket when in the back of the boat netting fish or what ever. The long U shaped piece mounts on the steering wheel fits a wheel 11.5 to 15 inches diameter.I usually just left the mount bracket on the wheel. The gear motor in the 4th picture mounts to the center of the steering wheel bracket with just a hand tightened knob.The other end of the gear motor the long arm is tied off against something solid otherwise the unit would spin round and round and not turn the wheel when you pushed the remote button. This is a simple machine. There is a receiver box to mount out of the weather somewhere it tells the helmsmen to to turn left or right when you push button on remote. I never had a antenna for the receiver it awalys worked well without.I took it out today hooked it up to 12v . put a new battery in the remote and it worked fine. I walked a good 20ft away and it still worked fine. It turns the steering in pulses so you do not oversteer. Very easy to wire up . red is pos blk is neg. I had a book at one time but I can not find it. I also looked on ebay to figure out some kind of value for this . Could not find one. So I am open to fair offers. I realize its old but it still works good so low ballers dont waste my time.Its.heavy shipping wont be cheap. I tried to explain operation as best I could if anyone has anything to add please do. This is old school we like old school. Sk8opedia ever seen one?
  13. I do not know I will get it out of the boat tomorrow and have a look.
  14. Thanks for the reply's guys. One more question, I Have a Garmin 73dv. I use it as a stand alone plotter. Can I just buy the chip and stick it in or do I have to hook my 73 dv to the computer? Confused Old guy talkin here. Do I need 12v to hook it to computer?
  15. Does anyone run this map on the fingerlakes.I am curious how accurate it is.
  16. 1 dozen some new , some used At $4.00 ea you can not buy them at the store for that... $48.00 Plus $7.00 shipping. Offers considered
  17. Wallyandre Thanks for the reply. How ever The top of the page says "Navonics a Garmin company" I see where you can trade in for the rebate. But it does not list which Garmin products are compatible with the maps. Am I missing something?
  18. Is anyone running the Garmin Lakevu HD ultra maps in the fingerlakes? Are you happy with it? I have a Garmin 73 DV It has the lake chip in it that came with the unit. Not much detail and way off on location. I want to upgrade to something more accurate without buying another mfg unit.
  19. 24 mag spoons ,all been field tested. Some have some wear.paint chips, scratches, chew marks. A few diamond kings, aluminum nks, and what have you. A bit of minor rust stain on some. Nothing that would not clean right up.Most all of these have caught fish. $77 shipped E of Mississippi river. Paypal accepted or money order USA only
  20. Check out my 72 never been in the rain. original.
  21. I called Pay pal they said everything is ok on my end. They do not know why its not working for you.
  22. I replied check your PM
  23. Gettin ready for the browns? 12 yo zuri stickbaits They work. Check the chew marks on the chartreuse ones Some brand new ,some hardly used $70.00 Shipped e of Mississippi river USA only Paypal preferred or moneyorder
  24. Works good ,great for planerboard fishing as you can turn and tilt rods at about any angle. Very Sturdy built. I slid it in and out of a berts track or you could mount with 4 bolts. You use a allen socket to turn holders and thumb screw to tilt in and out. $75 plus $14 shipping This side of Mississippi. Pay pal or Money order.
×
×
  • Create New...