Jump to content

emtystringer

Members
  • Posts

    1,368
  • Joined

  • Last visited

Everything posted by emtystringer

  1. not to bust on you Ray, but how do you get the #1 dipsy to go that deep with out stpping the boat,
  2. "Daiwa Sealine 47LC Reels" A pair <2> of Daiwa Sealine reels not the cheaper acudepth, in good condition.the drags work and they are not all sun bleached and the counters work good . $100 PLUS S/H
  3. hey ,look at it this way,some people would pay good money to have something like that pierced into there body.All kidding aside that must of hurt.
  4. ok GAMBLER, i have been doing it that way but seen some other post doing it the other way.i thank you
  5. Is it better to attach your rubber band and clip to your other line or attach your rubber band and clip to your other line and cable?
  6. what does the size of the boat have to do with falling over board.how many people go over on cruise ships..New York State is speeding on becoming a high tax and police state
  7. thanks that is the info i have been looking for,i am also wondering if the new head unit would hook up to the old 840 cables,
  8. hey BRIAN ,did you hook the new probe to the old 840 or did you get the complete new unit? JERRY -SHOEY'S friend
  9. thanks GAMBLER for answering my question.
  10. i know the subject is about liberators , but i have a question to those who use the rubber bands. at which end of my leader do i use the just a snap and which end do i use the ball bearing sweivel and snap at the lure or at the end where the rubber band is?
  11. I like to hit the Niagara River but don't want to be there when they lift the boom. does anyone know when they may lift it.
  12. Chowder, i see you favor the Depth Raider over the Fish Hawk but are you useing the new X4 probe with your 840 unit?
  13. am i heaing this right,that all ineed to do to my Fish Hawk 840 is to replace the probe with a new x4 probe and it will work or do i need other componets such as transducer or display.
  14. i was just curious because adding this and that to the fly it may kill some of its action andmay not really be worth it.
  15. I see some talking about tying an e-chip to a fly.What is the opinion on weather it is a general improvement or not over useing just a fly.
  16. the way the rules are,the boat with the shore line to his right should have the right of way and the other boat is to turn to his right which is out and give the other the right of way mainly because he can't turn in and run a ground
  17. the New York boat handling and navigation guide rules state two boats meeting head on they both keep to there right
  18. say RAY when useing power pro on the slide diver will the power pro slip threw at all in the diver?
  19. something else to think about when useing spinning reels is that every time you make one turn with the bail against your drag it puts a twist in your line . maybe your drag isn't working or its to lose.
  20. as long as were talking about home made boards. i fish with a guy that added a third board placed in between the iner and outer boards. i did think that this increased the pull and helped stablelize the board in rough water.
  21. i can only say that if you purchase lowrance you will receive a short warranty, then after that it will cost a flat rate $200 for repairs for the next couple years and after that if you have a problem on your expensive unit just chit can it for the new model.
  22. i think some of the people's thoughts on where the ten bucks should come from stem from falling out of the crib when they were a baby. in the pass and probably still alot of your ten bucks will going for some good looking hookers or some other fringe benefits of the polititions.If this is the case then lay down and let it happen and get ready for the next round of taxes and maybe you you can be #1 in the nation for the high taxes' its always better to be #1.
  23. has any one had a problem with running 2 different fuel lines out of a water seperator to 1 main motor and 1 trolling motor ?
  24. thanks for your help ,going to have a machinist try to install an arm
  25. the guy i bought the motor off of took the carbuator apart and busted off the arm that holds the pin that the float moves on and this is located in the top portion of the carbuator and you can't just buy that peice
×
×
  • Create New...