Netbender

My current transducer has three screws with 5200 on the threads into aluminum. Will they come out? I am in need of adding one new transducer for my new x4. I was going to pull my current one and mount the stern saver with 4200. Now I am not sure if the screws with 5200 will come out?? Shellback supports it, others do not. Sent from my iPhone using Lake Ontario United

Thanks for the info!

+1 Cisco - I want have access to it until the first week in May if you need me to measure it, let me know.

dry net, do you know the frequency of your garmin transducer? Sent from my iPhone using Lake Ontario United

Interesting Sent from my iPhone using Lake Ontario United

Yes, sorry, X4. Sounds like I will be OK, thanks for the details. I will have these about 6 or 7 inches apart.

ttt

Be aware, in NY at least, if you carry both expired flares and newly dated flares, you are in violation. Just carrying the expired flares has issues if the law man decides to bust your stones for any other reason.

Good Day, I am currently running a P66 for my FF. As the P66 is dual mode 50/200 - and the x400 is at 70, will I have any issue if I mount the two transducers on the same transducer mounting plate on the starboard side? Currently P66 is mounted directly to transom, planning on pulling it off, installing the plate, then installing both the P66 and x400 transducers as far apart on the plate as possible (12 inch plate). X400 specs say anything within 20kMz of their 70kMz may be an issue. I would still like to utilize the 50kMz option on my FF. Anyone have this setup? Something close? Thanks, Dave

4200 it is...

Thanks for your help! Sent from my iPhone using Lake Ontario United

Shellback, is there a minimum temperature to apply? I am hoping to mount the plate tomorrow Sent from my iPhone using Lake Ontario United

Upper Montgomery County Sent from my iPhone using Lake Ontario United

My concern is breaking the heads on the screws off. Also if any 5200 got on the plastic transducer Mount. Sent from my iPhone using Lake Ontario United

Yes, will modify the board to allow the rivet heads and old screw heads. Thanks! Sent from my iPhone using Lake Ontario United

Was wondering about getting the screws out in order to get the old transducer off. Sent from my iPhone using Lake Ontario United

As a sealant. Using two screws to secure. I have one transducer that was mounted with three screws and 5200 around the threads in aluminum. Will I be able to get those screws out? Sent from my iPhone using Lake Ontario United

Just do not see aluminum listed on either on the 3m spec sheets. Sent from my iPhone using Lake Ontario United

Good Day, which 3m adhesive sealant works best for mounting a transducer board to aluminum? All the specs on the 3m web site say fiberglass. Thanks! Here's to bending your net! [emoji481]

Thanks Fishy!

Possible to launch? Thanks, Dave Here's to bending your net! [emoji481]

From Diary program. “considering the current forage conditions in Keuka Lake, we are temporarily discontinuing these stocking programs.” (Browns/Atlantic). Rainbow stockings will get yearling Finger Lakes strain rainbow stockings in place of fingerlings. A bit larger fish.... 10,000 Cisco coming in Fall. Dave Here's to bending your net! [emoji481]

Will post a new thread.... interested in feedback Sent from my iPhone using Lake Ontario United

Good Day, timing is everything. Just got mine back.... “considering the current forage conditions in Keuka Lake, we are temporarily discontinuing these stocking programs.” (Browns/Atlantic). Rainbow stockings will get yearling Finger Lakes strain rainbow stockings in place of fingerlings. A bit larger fish.... Sent from my iPhone using Lake Ontario United