rolmops

Very deliberately working on the woodwork of the Starcraft Islander that I am restoring. Restoring a boat is almost as good as fishing and there are fewer weather problems.

Sorry. it comes without the transducer

OA 7522171 is a 1989 3 cylinder 80 horse or a 75xd (same thing). Check it out on page four of this attached pdf Mercury63_92(2).pdf

I bought it in march, but then I decided to go with a 1 kilo watt 588 . The 628 sells for $ 695 new. this one is $550

By the looks of it, it is an 582 L (ed) monitor. It is a one kilo watt unit without frills. Probably over 10 years old. They are very good units that with the right transducer will allow you to see your down rigger cable. They are very user friendly

Sorry these pumps do not have the filter inside. I got mixed up with the evinrude ones.

You can just unscrew the the big bolt in the center of the fuel pump and you will find the filter screen right behind the cover. that is the easy part. If you take the pump itself apart do it on a large piece of cloth. there are a few very small parts in there. like a ball and a spring. Make sure you remember exactly where everything goes. The diaphragm is very cheap , but people often end up buying a new pump. There are special tools to test fuel pressure, but I never used one. It is just easier to replace the diaphragm. They usually look deformed when you open the pump.

If neither of those tricks help your fuel pump may be under performing. There may be a tiny leak in the diaphragm or a dirty fuel filer which is in the pump.

I had the same engine and I had similar problems. It seems that these engines have a "dead " spot while accelerating. You can rev it up real slow and you will see that that your problem is very clear as you described. The engine does not get enough fuel at that rpm to properly accelerate . There are two ways to overcome the problem. the first is giving it a bit of choke as you near the trouble rpm The second is to slam the hammer down to full speed as you near the trouble spot. That often helps getting it over the bump.. Let us know if that helped

????

I will try to be “Devil’s Advocate” in this matter. I think that we just take it for granted that everyone should know that our fishing boats have lines out that are up to 400 feet behind the boat. Not everyone knows that. Also, being out on the water causes a certain “awareness gap” and causes the brain to go into a different place. Many years ago, when I taught my kids how to drive I told them that they should expect everybody around them to be complete idiots and that it is smarter to be wise than it is to be right. Using that attitude prevents a lot of trouble and keeps you from being upset when you should be happy

Are those the original ones made in Rochester,or are they made in Canada?

Sold pending payment

Another price drop. I need it gone. If it does not sell now, I will part it out

It looks like a treasure chest.

The west end also has a lot of browns,but the fly fishing crowds that stand shoulder to shoulder in the creeks over there, usually put a serious dent in the numbers.

price drop.

That’s what I read in some articles. My curiosity was peaked because of articles About hybridized Japanese/American chestnut trees that show blight resistance and that are being planted in the Virginias and now you mentioning chestnut wood

Nice project. Where did you find the chestnut wood?

ttt