Jump to content

Todd in NY

Members
  • Posts

    2,483
  • Joined

  • Last visited

Everything posted by Todd in NY

  1. You don't delete the ad. You simply mark it as sold/closed.
  2. Congrats to both, the buyer and seller.
  3. Hank is right about the "S" being a short shaft. That 17.1" might be the maximum transom height for this motor. Does this motor weigh 102 pounds like it says on that spec sheet? How many amps is the alternator? Some seem to be 6 amp and some are 12 amp systems.
  4. If you buy the hook2, I recommend the C-map Insight Pro over the Navionics + card. My old HDS 8 has the Insight maps installed by the factory (not on an SD card) and the bottom contours are more accurate for Lake Ontario than my Navionics + card. The sidescan is worth the extra $100 in my opinion. If you can afford the 9" screen, it makes a big difference.
  5. I will also add that DI can usually help you identify a school of bait or perch verses some suspended weeds or debris. That same image on 2D sonar just looks like a blob of "something". As already noted, DI & SI work best with bigger screens.
  6. I have a Humminbird 1198c with SI & DI and a Lowrance HDS 8 with just 2D sonar. Both units have GPS. I use both units on my boat, side by side. The Humminbird is easier to use than the Lowrance, in regards to adjusting the settings. I prefer the menu on the Humminbird as well. It's easier to navigate through all the options and features than the Lowrance. I like to use SI to see structure when I'm fishing/trolling along a wall or drop-off. But SI works best on a bigger screen. My 1198 has a 10" non-wide screen, which I prefer over a wide screen display. Both units have excellent 2D sonar. Sometimes one unit will mark fish when the other unit doesn't, or they will mark the fish a little different, and sometimes they will mark things the same. It's hard to describe, and it's not a bad thing at all because it gives me two different perspectives to look at. It's not one unit showing "better" info than the other, it just shows the difference between the units and the transducers. I like having both units side by side, but if I could only run one unit it would be the Humminbird. Why? It's more user friendly, it's easier to navigate through the menu items, and it's easier to adjust the settings than on the Lowrance. You will spend less time learning how to get the most out of a Humminbird than you will out of the Lowrance. Also, the Humminbird Lakemaster map card is unbeatable in my opinion. There are lots of good fish finder/chart plotters out there. Good luck with your search!
  7. Here is my old trailer axle. It's a hollow U-shape type that holds the spindle. Here is the boat that I need a trailer for
  8. It's time to replace my 1974 Sears boat trailer. Looking for a working boat trailer to transport my 1974 16ft semi-V boat. The boat only weighs 225 pounds empty and has no floor in it. It's basically a row boat with a motor on it. My current trailer needs new spindles, or a new axle. But my trailer is narrow by today's standards and all I can find is a 48" wide trailer axle (where the springs mount to the axle). My axle measures just 40.5" between the leaf springs. I don't think there is enough metal on the axle to weld a new spindle to it. A new axle would stick out about 4" past the fenders. The bottom of my boat is flat from the transom forward, about 10ft toward the bow. My spindles are worn out and they keep blowing out the rear seals.
  9. I've never met Hank in person, but he still went out of his way to help me with some boat repairs. He is a real class act and very professional. Thanks again Hank! The boat is working as perfect as can be.
  10. A few years ago I looked at a 22ft Sea Nymph with a 4 cylinder I/O, but someone beat me to it. Now I have a 22ft Sabre with an outboard. I don't think you will be disappointed in that boat.
  11. I avoid that river like the plague. I've lived here for over 20 years and I've never had the desire to launch my boat there.
  12. I don't know if they are feet & inches, or what. I wish they put as much detail into their Lake Ontario chip as they put into their Oneida and Finger Lakes chips.
  13. For whatever reason, the map details and depth contours are MUCH better on the Finger Lakes and Oneida Lake than they are on Lake Ontario. For example, it shows 1ft depth contours on Oneida Lake, and similar contours on the Finger Lakes.
  14. It works in my Humminbird 1198c SI unit. I took a screen shot of I-Bay this morning. I just finished working on my 4 wheeler and just saw your post for Oswego. I can take a pic of Oswego if you'd like, just for comparison sake. But another LOU member made me a good offer by PM, and I'm getting ready to PM him back. I-Bay on Navionics + Regions East, Humminbird 1198c
  15. I'll put it in my Humminbird tomorrow and let you know. I'll take a screen shot of any area you want to see and I'll post it here so you can see what it looks like. What are would you want to see a screen shot of?
  16. I haven't seen mine read in fathoms. Havent had any issues with my + Regions card at all. I bought it to run side by side with my Lakemaster chip for comparison purpises, but my personal preference is that Lakemaster fits me better.
  17. Thanks. My laptop has an SD card slot that I used for the updates, by inserting the card directly into the laptop. It might just be my HDS 8 unit's lack of features, but I never noticed anything useful after the updates. I got the card to show me bottom contours, hazards, and navigational aids. It showed all that stuff just fine, and it seemed like none of that information changed after the updates. I think the newer Lowrance units can squeeze more information from this card than my old HDS.
  18. I'll have to check other web sites like eBay and see what a used card is worth. I'm not talking about those price gouging sellers with unrealistic prices, but something reasonable.
×
×
  • Create New...