Jump to content

sszoldra

Members
  • Posts

    460
  • Joined

  • Last visited

Everything posted by sszoldra

  1. Thank you Bob, I sent you a PM. Piscataquis sent you a PM also.
  2. Fishmandan sent you a pm
  3. You could have also used a helicoil on it and kept it the same sized thread.
  4. Ok thank you
  5. Thanks John, I may see you this week
  6. With Wright's Landing closed, is there anywhere else to clean fish, or anyone open that does them. I'd do them on the boat but I don't have a wash down.
  7. I have a fully rigged Willie for sale. It hasn't seen the water this year yet. You won't find a better built boat than this one.
  8. If you watch the video it says you won't lose your tracks and points
  9. There's a way to reset the unit back to factory settings. Here's a youtube vid on it.
  10. Was this what you were thinking? https://taskandpurpose.com/in-defense-of-sky-penis
  11. I just use an old downrigger release and run the wire around the net handle and clip it to the wire again
  12. Maybe off the handle control or the handle that you can lift the motor off the boat with. Any way you do it something's got to be modified.
  13. That's not what I read here https://ijc.org/en/loslrb/lake-ontario-reaches-record-board-continues-respond
  14. No it didn't. But here's the word. https://oswegocountytoday.com/oswego-wrights-landing-marina-temporarily-closed-due-to-high-water-levels-and-flooding/lead-story/
  15. These people own the brand you can contact them there http://www.gibbsdelta.com/
  16. I hope to be getting up there the beginning of next week. I'll post pics then.
  17. Go Pro's are only good down to a certain depth, and it's not that deep
  18. Unfortunately I'm getting a little too old to be going out on my own anymore, and if you've been fishing Oswego, I know you probably have seen this boat. I've always had guys drooling over it, and now I guess it's time to let it go It's 21' with a 90 HP Honda 4 stroke, and a 9.9 Honda 4 stroke kicker. Both motors have E-start and power tilt with forward controls and are both connected for steering. This boat was built by Willie for me, and delivered in August of 2009 with a lifetime warranty on the hull, and the motors have always been serviced by 1 Dealer, Columbia Marine in Columbia, Ct. I have all the receipts, and you can call them and ask about the boat. I am a fanatic about the maintenance and if anything was recommended by the dealer, it was done. It's all welded with 3/16" Aluminum on the sides and 1/4" on the bottom and has 3 color paint. Full canvas enclosure, and a removable addition to the top that covers the entire back of the boat. This boat has plenty of room to fish in back as there is a bench seat mounted on the passenger side in the rear even with a extra large cooler I have opposite. It's at K&G campgrounds now and I haven't started it or put it in the water yet this year. I have no doubt the motors will fire the second I hit the key. The motors are both still winterized since last year, but I did put in 25 gal. of new fuel. At the end of every season all the fuel remaining was always pumped out. I also have the build pictures of this boat to show what a tank it really is. All the rods, reels, boxes and boxes of flies, lures, divers are included. I'll bet there's close to $3K in tackle. All the jackets and safety equipment, nets and anchor. This is a turn key boat. It was just Coast Guard Aux. inspected, and a 2019 season launch pass to Wright's landing is mounted on the glass .If you ever wanted to get in a boat and fish, this is the one. I have some old pics of when it was getting ready to ship to me, so I'll add current pics when I get up to Oswego. Price is $30,000.00 More options Raymarine Autopilot Cobra Chart Plotter Lowrance Fish Finder Fishawk X4D ControllKing for the kicker 2 Scotty Downriggers 2 Cannon Rod Holders with hardware that allows them to be mounted in the tracks incorporated in the boat on the sides or the back Mooring Cover Front Fish Box 2 batteries with on board charger 40 gal. under floor fuel tank with separate lines for each motor (always non-Ethanol fuel used) Heavy duty Baker bunk trailer /w Power Winch
  19. I have a Coachman Class C RV for sale. It's on a 98 Ford chassis with 50K miles on it. It's on a K&G Lodge site that's paid for the year. (lot rent is $1950) I live in Ct, so I always drove it home in the fall and back up for the spring. It's 31' and sleeps 4 or 5. Everything works including the generator. I'll have to add pics or can show it when I get up. The photo attached is a stock photo, it's pretty much identical to mine.
  20. My Honda 9.9 does have an alternator, but it's not enough to recharge 2 batteries after bringing up downriggers and running a auto pilot, along with the rest of the electronics that are on all day. I run 16# torpedos and my kicker actually slows down while I'm bringing up the weights. I've never had the batteries go dead because I recharge them overnight with the on board charger.
  21. I have the Controllking on my 9.9 Honda. It works as it should, but I have gone thru a couple, I guess you can call them actuator motors that move the throttle. It's an easy replace, and I've heard that you can just buy model aircraft motors, but I replaced them with originals.
  22. It's real. 100 K and you can be a charter capt.
  23. X3 on that. Also, some Ranger nets have a lifetime warranty. The last time a hoop broke on me I took a pic of the hoop and the receipt (I'm a pack rat when it comes to receipts) and emailed them and they had a replacement to me in a couple days no charge..
×
×
  • Create New...