Jump to content

bout time

Professional
 View Profile  See their activity

  • Posts

    1,436

  • Joined

  • Last visited

 Content Type 

Everything posted by bout time

  1. bout time
    Columbia's please. i will stop by this weekend with the money
  2. bout time
    I will take a large and one Medium for dad please
  3. bout time
    My autopilot is raymarine hydraulic and is Plummed into my main. I connect my main to my kicker with an EZ steer bracket.
  4. bout time
    I have a '97 2352 with a 350. I have trolled with it but did need bags to slow me down. If you are serious about trolling you can adjust the prop for a cheaper option but will sacrifice on top end. I have a 8hp high thrust and strongly suggest that if you can swing it. Saves on gas, and insurance of a second motor should your main go down Sent from my SM-G900V using Lake Ontario United mobile app
  5. bout time
    I've always scraped the coating off as mentioned above. I did hear of using a lighter and melting the coating off but have never tried it. Don't be afraid to give yourself a good section of bare cable. I have at least 3 wraps around my spool to ensure it makes good contact
  6. bout time
    Can't thank you and all involved that make this happen. Another great event and memories and friendships that will last a lifetime
  7. bout time
    X 2. With my Raymarine I leave it on Manual gain and adjust it as i go through the day depending on depth im fishing
  8. bout time
    might have been someone else's post as i never had 24 j-plugs for sale. Thank you for getting back to me though.
  9. bout time
    gds546 - PM sent on the j plugs
  10. bout time
    Updated ....
  11. bout time
    What are you using for backing? And how deep do you figure you are getting with the 300'
  12. bout time
    I also have high seas. I run their triples and am very happy with their product
  13. bout time
    J-plugs still available
  14. bout time
    If your running them for dipsys angle them lower so they are horizontal to the water and tighten them down.
  15. bout time
    Welcome back to the lake
  16. bout time
    Great event and proud to be a part of it. Every little bit helps
  17. bout time
    My setup is 2 Batteries, Main Motor, Kicker motor with charging system, and a Perko Selector Switch (1, 2 , Both, Off). Can i wire it like the diagram below and use the selctor switch in the BOTH position to charge both batteries if i want to (with only one engine running at a time). I have my autopilot, GPS, FishFinder, Radio, etc wired to the common. is this setup ok? thougts?
  18. bout time
    Any pics of rear deck area when all together ?
  19. bout time
    There were some silvers (kings) taken today out of FH. Not big numbers but some credible reports and I personally saw a couple of them
  20. bout time
    I would look at your prop if the bags are working enough for you. My father has a 19.5' with a 3.0 liter and we had to change the pitch of the prop to achieve the speeds he wanted
  21. bout time
    What size is your main engine? With (2) 36" bags on a 20 foot boat you should be able to get down to 1.2 or so. You can also adjust the pitch of your prop to help slow down as well
  22. bout time
    What is the speed you are trying to achieve?
  23. bout time
    This is what I get
  24. bout time
    I do know that guys fish for them just on the inside of the channel by the buoys. I have a camp on blind Sodus and it was stocked a couple years ago but haven't seen any activity in the past 2 years. Seen very few caught out of the bay last two seasons.
  25. bout time
    No it will not hurt the motor as rigger motors are designed to go both directions
×
×
  • Create New...