martyp
-
Posts
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by martyp
-
-
planer board mast have been sold. I would like to get 275. for the downriggers ,thanks
-
That is correct, they are speedtrol made in michigan and mostly stainless high quality mast with many adjustments for hieght . You will never need another
-
someone is looking at the mast that are stainless steel and heavy duty and look like new. The riggers are older but one is in great shape but the other has a hose clamp around the pulley and neck that seems to be working but I have not used it personally. I would take a little less for that one. thanks, Marty
-
-
I thought a bad day for Chris was a 3-fish morning, get well soon.
-
Great fish Chris, met you at the gas pumps Thursday. Your reports have are very helpful.
-
Thanks, that should help
-
does anyone have a recomendation for a good power gripper with scale for salom catch and release? thanks, Marty
-
Fishing Report
Your Name / Boat Name:martyp 264 wellcraft
==============
TRIP OVERVIEW
==============
Date(s):8/31
Time on Water:6pm to 8pm
Weather/Temp:79
Wind Speed/Direction:
Waves: calm
Surface Temp:76
Location:i-bay
LAT/LONG (GPS Cords):
===============
FISHING RESULTS
===============
Total Hits: 1
Total Boated:1
Species Breakdown:king
Hot Lure: 28nk not sure the name
Trolling Speed: 2.7
Down Speed: 2.5 to 3.0
Boat Depth: 120
Lure Depth: 80
Took the wife out for a relaxing evening and a little late season fishing and set the first rigger and was about to set the other when this brut hit. Without a scale I guess he was in the 30 lb range. He only had one good run in him before he gave up but was still alot of fun. I spent 5 minutes trying to revive him and to my surprise he swam straight down so I suspect he made it. One was enough tonight
====================
SUMMARY & FURTHER DETAILS
====================
-
Thanks to all, I should be able to land some of the bigger steelies now!!!!
-
Hello fellow fish freaks, Just wondering if the fish that are dancing and spitting my spoon are steelhead and is there a technique to keep them on? thanks, Martyp
-
I had a crazy idea to have a bracket attached to both motors except the bracket would have to pivit as the big motors turn. there is 10 inches between the motors so I think the 9.9 high thrust long shaft on the side will have to do it . thanks for all your help. oh, the batteries are dead center
-
seems like a 9.9 high thrust will work if its not to windy. thanks
-
Thanks, I should pass on the motor but i'm not convinced the 9.9 would be big enough. Either way, I have to have some kind of special mount built and I hope its worth it. thanks again, Marty on the bay 264 wellcraft
-
I found a 1998 25hp 4 stroke mercury mariner kicker with controls and electric start that is in mint condition. Very little use. My question is, do I spend the time and money to have my boat modified to make this motor work? I have two 150 gas guzzeling outboards pushing a 6000 lb boat. The transom is full and the only place to put the kicker in on the same side as the driver witch I'm afraid will cause the boat to tilt to one side. I would spend alot more time on the water if I had the right setup. Someone told me a 9.9 four stroke woulden't be big enough.
-
thanks, sounds like I may have to give them a try
-
hey fellow fishermen, I have these two nice mast with reels and went out and bought two gimble mounts. Now all I need is the planer boards. My question is, Am I wasting my time with all this gear if i probably won't ever have more than four lines in the water? thanks marty
-
sorry, the price is 150
-
-
sorry, I can't use your mast
-
-
I have two like new single reel mast that are 6 ft long .$100 each
-
thanks all
-
Name: marty p
Location:Ibay
Home Port:Ibay
Boat Name/Type:264 wellcraft coastal
I fish for:browns, lakers and salmon
==================
Hi everyone, sure is different than pulling lead core for lakers in the adirondacks. Moved here from Old Forge a couple of years ago and am determined to learn the ropes on the big water. Bought everything I think I need except a probe and I'll probably get that soon. I 'm dying to get into the shallow water fishing in the spring. I found a couple of out riggers and am about to build the planer boards . hopefully the plans I found on line will do the trick. The only other issue I may have is the two 150 carberated out boards that will be idleing for many hours. I may buy a little 4stroke trolling motor if there is a way to mount it. Anyway, I hope to be able to report any success on this site spring and summer.
2 mag 10a and two 6ft planerboard mast- Irondiquoit
in Classifieds - Buy, Sell, Trade or Rent
Posted
yes,for the pair