-
Posts
13,858 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by Sk8man
-
-
Cletus give yourself a pat on the back for getting "Mr. Perch" to open up about the perch
-
-
-
It is the downrigger not the cable that uses the positive ion charge so it probably doesn't make any difference as long as it is steel cable
-
When younger I could sit in it touch it etc. without consequences but once I did have a reaction to it (throwing cut trees through a chipper without a shirt on and getting a bad case of it ) I became highly sensitized thereafter. There seems to be a reverse tolerance for it (i.e. increased sensitization with subsequent exposure so he may need to be real careful around it.
-
Accustrand (Cablestrand Corporation) or Torpedo brand have served me well
-
-
Buying some new downrigger reels - Tekota or Saltist
Sk8man replied to Dan M's topic in Tackle Description
And the winner is..... There is also something to be said for selecting the same reels for the particular usage e.g. divers vs. downriggers for each setup especially if you have other folks going with you on the boat. With a mixture of reels e.g. one rigger reel that is a Diawa and another that is a Tekota that have a different feel and operate slightly different in the heat of the moment it can create a little confusion and that may be all that is need for a fish to get off. -
-
When it comes to GPS stuff Garmin devices are usually top notch; the depth finders seem to be so so from the reviews i have seen. I think if it was just a GPS with mapping standalone I was looking for I'd stick with them as long as you don't have to interface it with your other stuff. I think Garmin integrates Navionics with its LakeVu software.
-
I believe they usually come in 12 and 9 inch sizes if this makes any difference. It is also important to know the spread of the holes intended for use unless you intend to drill as each application can be a different span between screw holes as well as the hole diameter itself. The gimbals are not all the same but most do have a 30 degree angle that usually anchors to toward the bow. There are some inset holders installed in boats with the tube straight down or to the side. The screw holes of Cannon tracks are not aligned with the screw holes in either the Cannon tracks or the common generic ones by the way.
-
You are correct. I didn't word it very well I was referring to the entire life cycle and where it occurs entirely in fresh water and it is 3-10 years in duration. I have read in the past that in the oceans they have a longer life span (e.g. 4- 15 years where they live and then breed in freshwater but I have also seen 4 yrs in the ocean in another article so I'm not sure) http://www.glfc.org/sea-lamprey-lifecycle.php There are 19 - 43 different types too (depending on source) and some are non-parasitic.
-
-
-
I was there on the west side and marked a lot of bait with fish mixed in and nearby in the 70 -90 ft range. I caught 3 rainbows and a laker 60-70 ft down over 70-76 ft. All rigger action nothing on 300 copper or 7 color leadcore. I had some interesting display shots of some interested fish and I believe I may have caught two of them (rainbows) just a couple minutes after they appeared on screen. Some nice bait pods marked today as well.
-
There have been several problems with flooding and them getting over barriers and the treatment is complicated. Weather conditions have to be pretty exact to avoid collateral fish/other organisms kills etc. In years past the environmentalists presented some objections to treatment for Cayuga delaying things significantly.
-
-
-
The battery harness certainly is quite delicate
-
New(to me) boat - what would you look for? 10-13k range
Sk8man replied to Dan M's topic in This Old Boat
-
-
-
I think I would be looking at the north end of Cayuga. For smallies I would think start at where it drops off (starting at about 17 or 18 ft) near Canoga toward south on the west side and from Frontenac to Farley's Point on the east side. Largemouth all along the extreme north end weeds both sides.