-
Posts
13,858 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by Sk8man
-
-
-
.https://www.hodgesmarine.com/powp7188800aj-powerwinch-40-x-732-replacement-galvanized-cab.html
-
Time for LOU to file Lawsuit-Ramps closed
Sk8man replied to garrymny's topic in Open Lake Discussion
The feelings are running hot right now and that is understandable. The main problem is that not everyone is doing their best to stay from others and some folks are doing crazy things (like spitting or coughing on food in the stores for laughs). For the past couple weeks I have driven by the Canandaigua launch and the pier. I counted over 50 trailers in the parking lot one day and there is only one MAIN ramp (handicapped one) available with a rail running the length of it pretty much forcing you to grab it when coming in especially. I also saw a bass boat about 17 ft long with 4 people in it with two sitting right next to each other in the front. Each time I drove out on the pier there was a hot dog vendor selling and three or four people standing right next to each other talking to him, and groups of folks milling about and walking in groups. These are the types of folks that have spoiled it for the rest of us and they are the ones potentially spreading the virus while many of us are doing our part to safeguard others and ourselves. I have been fishing over 70 years and I have given up other activities long ago such as hunting and things like golf etc. to be able to fish year round. It means everything to me EXCEPT for sacrificing my health because without that no fishing or anything else. I had already registered for derbies which I look forward to each season and even preparing for them in the winter months. At this age I don't know how many seasons I have to look forward to and my boat is now sitting right next to my house waiting to go. With all this in mind I have stayed put since February 26th and it sucks; but but at least I know that I haven't been jeopardizing my health and that of my fellow fishermen and other citizens. I dislike the Emperor and his authoritarian tactics as much as anyone on here (e.g. so-called SAFE Act) but at this point I don't give a damn if he is wrong or right or the politics involved in his specific decisions right now during this pandemic. These precautions may be f d up but something has had be be done to keep the previously mentioned idiots from harming others, and yes it is extreme but not all that hard to follow the rules until we get back to sanity. -
Oak orchard 4/8
Sk8man replied to Benfolkhero's topic in New York Fishing Reports - Lake Ontario (South Shore)
-
Oak orchard 4/8
Sk8man replied to Benfolkhero's topic in New York Fishing Reports - Lake Ontario (South Shore)
-
-
Kinda like older chicks
-
-
-
People aren't numbers. These are REAL people that are dying and you don't seem to take proper note of the fact. If it were your own relative you'd probably be crying like the baby that you appear to be. Grow up (despite your actual chronological age)! Like the saying goes. You can't fix stupid!
-
Stickbaits & Spoons on Leadcores
Sk8man replied to Reel Doc's topic in Questions About Trout & Salmon Trolling?
Just to throw in a suspicion in the form of an opinion: Many species of fish have a pronounced lateral line. It's function is thought be be a detector of vibrations and minute electrical signals. The fabric on leadcore is composed of a braided material that probably creates some pretty good friction in the water while trolled and the side to side motion may create the impression of schooling fish or baitfish and serves as an 'attractor" to the following fish. Sound is known to travel much better and further underwater than on land. The copper may do this in a different way as it is a conductor of electrical energy of various types and may have minute chemical reactant properties with water as well and the fishs lateral line may detect it and serve as an attracting factor. If the action of a lure in the water being trolled acts as "vulnerable" or "wounded" following these different line actions swaying back in forth in the water they may grab it. It is also a reason to change up speeds and make turns while trolling as change in the action may be the thing that evokes a strike. The stealth factor may be strong for both the copper and leadcore as this movement through the water occurs a long ways behind the boat. Both the leadcore and copper seems to "snake" up and down and sideways in this manner. The source of my suspicions is the use of data from the Fishhawk TD attached to each setup and experimenting. Both setups will go considerably higher in the column and lower as well than some of the "expected" values at extremes in the speed ranges and it also depends on the size and type of lure run. -
-
-
A lot of good advice here. Money is often an issue especially starting out. Take your time and ease into it. The first thing to think about is the question of is my boat setup OK for what i want to do? Each one of the things mentioned are good tactics but you have to have the boat setup to use them. For example rod holders....if running dipsy divers you will need very sturdy metal rod holders very securely attached to the gunwales of the boat (which can also double for toplining and other things as well). Dipsy divers exert a lot of torque and pressure at their bases so it is crucial to have them well secured to avoid flexing and weakening on your aluminum boat. They need to be beefed up underneath for best results. Some folks use tracks with the bases of the holders inset in them again...they need to be anchored properly to distribute the torque. Suggestion: if you haven't done much trolling start out simple; once the rod holders are set up topline in the shallows. On the Fingers you can even use the spinning rods trolling relatively shallow water in the Spring and fall as I did when I started out many years ago. For Lake Trout on Seneca and Cayuga a couple of dipsy diver wire rigs would be a real good idea. The wire instead of braid because of the water fleas in the summer months. A couple Okuma Magda 30's or 45's with 1000 ft of 7 strand stainless wire would be a good idea and not very expensive in comparison to other stuff you may gradually move up to in the future if you decide to fish Lake O, and the 45's can be used there anyway although the Kings can test them. Dipsy rods are highly variable in preference among fishermen but I have even used medium weight 8 1/2 ft downrigger rods with them and they work OK for the Fingers. If you decide on heavier (and perhaps shorter)rods they can also double for running cowbells with Gambler Rigs (killers for Lake Trout on the Fingers and Lake O) just attaching a three-way swivel to the existing swivel snap used for the divers and suspend a heavy sinker at the bottom. Depending n the season and related depths fished several dipsy sizes can be used to fish from shallower (smaller sizes) to deeper depths (larger sizes). Keep in mind the conventional rod tips weren't designed for stainless wire so you'll need something to modify the tip and the easiest solution is a twilli tip which preserves to wire without cutting through the tip. Another basic thing to consider with trolling is how well can you control your speed (e.g. with just your main motor)? You will need to be able to get your speed down in some cases to 1.3-1.8 for lakers especially early and late in the year when they are sluggish. You'll need something to measure your speed with as well and there are quite a few options and often some of the effective but perhaps outdated by more expensive or sophisticated equipment will often appear for sale here but the basic impeller driven older ones still work and are less money. You'll notice I have purposely left the downriggers for last. This is for multiple reasons; one this is your first boat they require proper setup on it so you need to get used to the boat first. Two - they require some experience seeing how they operate before investing in them regardless of whether manual or electric. There is a lot more to using them effectively than just lowering and raising them You can always add them as you go along. You need to learn how to troll to begin with to be successful and this involves getting a feel for your boat (e.g.handling) and the strengths and weaknesses of your system and they all have both. I was probably one of the first if not the first person to use downriggers on the Fingers (manual Riverias) in 1975 (the other people out on the Finger Lakes had never even seen or heard of them back then). It takes time to learn to use them effectively and experienced fishermen often forget about this fact.because they are used to them and take a lot for granted and you can add them as you go along. They are very useful to have in the arsenal but have their time and place in it. I hope these comments are useful to you in thinking about an approch to your quest. Best of luck. Les
-
https://sliderfishing.com/
-
-
You won't be sorry. The Lakers love em
-
Is water coming from here normal? NOPE-I'm screwed!
Sk8man replied to garrymny's topic in This Old Boat
-
Spikes (sometimes even preferred over minnows) and sliders work fine for perch and the one thing to remember is to keep the hook point slightly covered (i.e. hidden).Oak leaf bugs are often best if you can find them.
-
Yeah of each one ever made and you probably have one of Brian's fancy display cases for them Mike
-
-
Is water coming from here normal? NOPE-I'm screwed!
Sk8man replied to garrymny's topic in This Old Boat
-
I have tied new leaders on several dozen set-ups, put new line of all my perch rods, possibly wore off some of the finish by polishing up spoons too much, and I still am leaving my boat in storage as I am saving that for the last thing so that I can put all my stuff back in and leave rubber in the driveway when I take off for the lake