Chaff
-
Posts
62 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by Chaff
-
Thanks. Is that the 30 or 45 lb. test
-
That's what I use to run. Went to weighed steel. Want to switch back. AFW is all I could find. Just wondering about the sinking rate. Afw is a little smaller diameter
-
Thanks for the replys. What I have found out about AFW copper the 45 lb test is the diameter of the wire is thinner than A-tom-mik.
-
I'm changing one of my 400 weighted Steel over to a 400 copper. The only 45 ld test copper I could find in stock is AFW. Any info on this brand would be appreciated. Thanks Mike
-
Thanks Sherman. Right now I have nothing. I would start from new. I done research. I looks like a good unit. I only know one person that has it. He likes it. He has a inboard, kicker is right in the middle. Mine would have to be on one side.
-
Is anyone familiar with the Garmin Reactor 40, auto pilot for a kicker. I'm thinking about putting one on my boat. I have a 24ft Grady White, with a IO. Thanks
-
Has anyone ever used, or can you use the Okuma copper/lead core rod, for wire dispys rods without a Twili-tip. Thanks Mike
-
Custom painted Spin Doctor
Chaff replied to Chaff's topic in New York Fishing Reports - Lake Ontario (South Shore)
Krylon makes a plastic paint that would work well enough for dispys. -
Custom painted Spin Doctor
Chaff replied to Chaff's topic in New York Fishing Reports - Lake Ontario (South Shore)
PA223 27-13 -
We caught 2 mature Kings today off the Oak 28 13 wire diver 200 out. I custom paint walleye lures for Lake Erie. Though I try a Spin Doctor. I painted over a clear glow and add the glow tape. My son holding the salmon and spin doc, each picture shows the opposite sides.
-
Thanks for the info. -
I also use Frank's boards(Amish Outfitters). I moved the eyebolt forward 3/4" and up 1/2". I also have rutters. Anything under 2mph they seem to run behind the boat a little bit.
-
Does anyone ever use J Plugs anymore. And if so when is the best time to use them. I have a box full of them. I could never get them to work. Any info would be appreciated thanks. Mike
-
Thanks Mr 580. Your info is much appreciated. I have one other question if you do not mind. Does that little insulator actually work and break the circuit before the ball comes out of the water. I have a fiberglass boat with an IO. Grady White.
-
Fogger, it's a brand new one MAG10, 250ft per minute.
-
Thanks. This happened to my friend. He was running it out stopped it snapped 9 ft above the ball, according to the counter. I purchas One and when he was telling me. I'm going to try mine out this week. Thanks for your response. I also run Amish Outfitters schockers even on my old slow ones
-
Thanks. This happened to my friend. He was running it out stopped it snapped 9 ft above the ball, according to the counter. I purchas One and when he was telling me. I'm going to try mine out this week. Thanks for your response. I also run Amish Outfitters schockers even on my old slow ones
-
Yes I run schockers. 👍 No I did not loose anything. My friend did, he let it down to the depth desired stopped it the line snapped 8 ft above the ball according to the counter. I have not installed mine yet. Just finished the assembling. Thanks for the info.
-
I purchased a new Mag 10, with 250-ft per minute speed. Has anyone had troubles with the cannonballs breaking loose with the down position when it stops. Any info would be appreciated Thanks.
-
What type of knot or connection, are you guys using to connect steel line to wire line. Any info would be appreciated. Thanks
-
Thanks
-
What is the best knot to tie copper to a micro swivel. Any info would be greatly appreciated thank you.
-
What is the best knot to tie copper to a micro swivel. Any info would be greatly appreciated thank you.
-
Thanks
-
I'm off of Rochester fishing for Browns. Any info on depth and spoon colors. Thanks