Xxx

I understand what your going through Rolmops, trust me when I say I know. Your mind is a powerful thing. It can be your worst Enemy as it can be your best friend and your most powerful Freind. It's the hardest thing to start, but get up, and even if you just drive around and look at the scenery, or I have friends that all go to my buddy's place that has a big area in his shop for a bs. Session. In the morning, and before you know it, it's lunch time by then you have little nick-nack things to do at home to do. See for me my whole family leaves at 7:45am and doesn't get home till 4:00pm, I also keep busy with electrical problems to solve. Like a guy brought a signal stat 900. To rewire it has 11 wires coming out. But with the new double filament bulbs we don't need all the wires, anyway now I'm working on that. But even just a ride to nowhere is good fuel for the brain. If need be give me a call as I have been at the bottom of the barrel after my back surgery and they told me I'll never work again. Pm me your #. Pap ps. I bought a middle of the road air brush, now I need paints, so I been research on paints so, we go from there.

Where's it going to be taken place at?

Oh no, I honestly thought for a while he was absent from the board. I never gave it a thought he might be sick. Send him our condolences, From the PAP Family.

OOH YA, BS, it's all about whosever going to grease the back pocket. I had relation that owned a great piece of property on RT 209 they wanted to put a convenient store and gas station there. There's no gas station within 7 miles of my house, yet they were shut down, year after year. After many year of the word NO NO NO, they sold the property. 2 years later they're breaking ground, HMM wonder what's happening here now? Wouldn't you know a brown sandland no English speaking family is putting in a ----////----yup gas station, low interest government loan, no tax paying on capital gain for 7 years. Now the whole family lives upstairs of the convenient mart, with son in law taking it over next year. It will be going on 7 years now. The two older ones just got back from their homeland after several weeks. They took the U.S. Money overseas, and now they're living in comfort!! America what a great country!! If your from another??? He's has the highest priced gas in the area, yet the dumbass people support him by getting fuel there, and the highest prices on chew, and candy for the kids. I'll drive the 7 miles to turkey hill, cheapest on fuel plus a .03 off a gallon with your points card.

Yes I agree with not being protected. If your set up is like mine, I ran all my wires along the transom and to get there is BE Och, so I used breakers no need to carry a hand full of fuzes, although most folks have glovebox full of everything but 30 amp as they are not popular in the automotive industry. My alternater is also say unique. I put a longer power stud in and ran a wire up to a 3rd battery. I put a clip on clamp like what a battery charger has. I have lights forward and onto the back deck for night eyes or early morning lights. After owning my own starter and alternater shop since 1982 all this is at my finger tips. I built my own alternater, and just shy of a welder it works, and I used a very low rpm excited regulater that is adjustable. So at low rpm she's charging like as if the motor is a 2000 rpm.

That's why you should run 2 batteries and use breakers not fuzes, your kicker ain't doing shyt as far as keeping your batteries up. At 5000rpm the kicker might be pushing 6-9amps, get a 1-2-all switch and wire it that way. So if you don't have enough juice to start on 1 battery move the switch to both and fire her up leave it there till your volt meter hits 14 volts, now there both charged.

Hell the Okuma magda reel is cheaper than Cabela's own make and same goes for Bass Pro's own brand of LC reels.

This might be what you were referring to.

Then why when we look in the parking lots I see way more roller trailers than bunks? Are they cheaper to build ? I know I helped replacing the bunks is a hell of a lot cheaper than replacing the rollers and washers and clips. I did this on my roller trailer. I replaced the black dry rotted rollers with a clear non marking roller which wasn't a special order. At the time I had a white 18' center console with black marks all over till I replaced the rollers.

I ran the suffix last year and had one hell of a time getting the sheathing off the lead it was like stuck, and yes it was broken all over, when you finally got the lead core loose in was in inch pieces, not happy after fooling around about an hour to get 6" of lead because it was in inch pieces, I didn't have enough line to make a uniknot, I ended up using the Spro swivel trick. I bought two 10 color spools and the both were a bear to work with, no more suffocate for me no I didn't misspell the word. Pure shyt in my mind the suffix is!!

Well I'm in the process of trying to come up with a back rollers and the rest bunks. I have had boats for many years and all were roller trailers, I went with my uncle who's inlaw owns a 22ft cuddy and it's a newer trailer boat package, trailer is a bunk trailer. He backed down to the water unhooked the boat completely from the trailer, threw me the rope while I walked to the dock. He then backed into the water till boat was free. Pulled boat over to the dock, easy. Loading was spot on as the bunks put the boat on the trailer perfectly. Pulled ahead till I could reach the chain hook as I was nervous that the boat was going to slide back, not the case!! OH and the wind was coming the absolute wrong way, yet loaded perfectly. A roller trailer you need to back to the water and into the water that you can reach the both hooks. I unhook the safety chain then let cable out a little then back into the water enough to get wet up to my ankles mabe more, unhook the cable run over to the dock and pull boat over to dock. Now loading I tilt my rear rollers so the foremost roller is as high as it gets drive boat onto trailer so the bow is in the back set of rollers, OH raise trim up till just under the water which also makes for lift on the nose, square up with the front bumper slowly add power until you have the boat up to or close enough to hook winch cable, continue power till your partner gives you the sign. If you have a boat that's 20ft with a open bow that you can reach the hook yourself that's what I had before and a roller trailer is the way to fly. If you have a 22ft cutty like what I have now, this boat is a Be'och to load period, I think I would like a bunk trailer like my uncles inlaws. I saw many pluses in a bunk vs. a roller trailer. Me being disabled can't do it myself, but even the way I am I could load and unload a19ft open bow boat using a bunk or a roller trailer, but I'd prefer a bunk over a roller either way!! After seeing Dave load and unload his boat off of a bunk trailer. I'm sure there will be guys that will say rollers all the way, and vise-versa!! They sell both types yet so whatever floats yer boatLOL

Sad, Sad, Sad!!! every F'N year this happens!! What in the hell were these guys doing out there?? 2 days around or near 50* and it hasn't been below freezing but a few hrs. in the early part of the day, for many days. Foggy days eat snow and ice like rock salt!! Guys are posting fishing reports from a damn boat there's no ice at the launches, Hello!!!