-
Posts
150 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by rlconverse
-
Iv got an elite 5dsi and havent been real happy with the depth/ fish finder side of it.. Id suggest downloading the updates off the lowrance website you can also download and print off a full operators manual for it.
-
-
No problem. Good luck to yah
-
Should be a basic roll pin in the center of the spool. Just got to pull all the cable off
-
Once you take the electric motor cover off the side n remove the cable. On ur schmetic drive out number 13 easly. That will free up the shaft n spool. Its in the center of the spool
-
i seen and heard of a couple issues like this how old is your fuel line from the tank to the engine? my father had an issue this spring with his 89 mariner the problem was that the fuel line had dry rot and was sucking air good luck!
-
For Sale : USA Items for sale
rlconverse replied to Lil Jake's topic in Classifieds - Buy, Sell, Trade or Rent
-
Thankz for the help
-
Started running a few jet divers. Both 30's and 40's. been running them On planer borards. And they run fine. Have taken lots of hits on large fish. But can not keep them on the hook. Any sugestions on helping the hook up to in the boat ratios? Thank you
-
Oswego7/5
rlconverse replied to eric cooper's topic in New York Fishing Reports - Lake Ontario (South Shore)
Im by no means a pro at copper but what iv found is keep the tip high n not let the "belly" of the copper get wobbing side to side. Other then straighted hooks we havent lost any on copper. -
I bought an elite 5 dsi. The gps and chart plotter work great i have yet to figure out how to mark fish with it. I have downloaded the updates for the elite 5 dsi and printed the full operating manual for it. If i were to buy again i would but the elite 7 hdi. Not real happy with it
-
Help! First time with my new toy and it's all burnt out
rlconverse replied to Goatboy's topic in This Old Boat
Have any luck fixing your 4.3 l? -
I would not recommend the dsi. Great bottom view. But hard to pick up fish heard people having better luck with the hds
-
i recently bought an elite 5 dsi lowrance. I'm thinking i bought the wrong one i cannot seem to mark a fish with it. the gps side of it works great. The speed and temp work nice it reads the bottom great but i cannot get it to mark fish. its irritating to spend that much money and not have it do what it says it will. any advice would be much appreciated or it may end up in the bottom of lake O thankz
-
i bought a "new" used depth raider off this site, got it mounted on my boat never having used one before hooked it up on the rigger wired up the read out and spooled up new coated rigger wire. i striped back the end of the coated wire and tied it directly to the swivel then wrapped it in the water proof tape. Tried it Sunday with no luck of it working. I did put a new battery in the probe. is their any way of testing the probe to see if its functional. any ideas would be greatly appreciated. thankz.
-
i bought a "new" used depth raider off this site, got it mounted on my boat never having used one before hooked it up on the rigger wired up the read out and spooled up new coated rigger wire. i striped back the end of the coated wire and tied it directly to the swivel then wrapped it in the water proof tape. Tried it Sunday with no luck of it working. I did put a new battery in the probe. is their any way of testing the probe to see if its functional. any ideas would be greatly appreciated. thankz.
-
Cabelas Depthmaster Combos
rlconverse replied to Adk1's topic in Questions About Trout & Salmon Trolling?
try this hyperlink instead http://www.tacklehaven.com/products/OKUMA-TROLLING-COMBO-CPM%252d90M%252dCT%7B47%7DMA45D-ROD-%26-REEL-.html -
Cabelas Depthmaster Combos
rlconverse replied to Adk1's topic in Questions About Trout & Salmon Trolling?
i found an okuma rod and reel combo for 45 bucks on the tackle haven site http://www.tacklehaven.com/products/OKUMA-TROLLING-COMBO-CPM%252d90M%252dCT%7B47%7DMA45D-ROD-%26-REEL-.html -
i picked up an 88 25' Larson with a 4.3 v6 in the fall, it needed some serious TLC the original ritzy comforts had long been removed and cobbled together. the trailer that came with the boat had also seen better days. the previous owner of the boat had told me of how he "gave er all she had" and that a wicked noise came from the motor. said his friend lifted the engine cover off and something blew out of the engine and landed in the water. shortly their after it seized. picking the boat up cheap i found that the motor had in fact died of and RPM attack and shot a rod threw the pan. i got lucky and picked up a great deal on an 89 Larson on a yacht club trailer with a very very low hr 5.0 v8 in great condition as well as the out drive and other goodies. the boat itself had been left out in the weather for at least 10yrs neglected and not used, after some engine and out drive swapping and tinkering on the 25 footer she runs great n hauls the mail if ya need to. my buddy that helped me with the work came up with Redline for the name figuring that its already been pushed to the end and that it hauls now would be a fitting name. good luck naming your own rig. - fish hard - its better then work even on the worst day-
-
i have been doing a lot of research one the elite 7 also, i have the same questions about the transducers. i was also considering a thru hull
-
thank you for everybody input i welcome anyone else ideas as well
-
just getting into lake Ontario salmon fishing trying to get my boat set up. i have been looking at a lot of depth finders/gps chart plotter combos. im not sure what i should be looking for could anyone shine a little light on this for me? thank you
-
Browns in Mexico Bay
rlconverse replied to rolmops's topic in New York Fishing Reports - Lake Ontario (South Shore)
thank you for the info. today was a tough day for the kings -
Browns in Mexico Bay
rlconverse replied to rolmops's topic in New York Fishing Reports - Lake Ontario (South Shore)
how deep of water were you fishing