finsntins

ill be driving right bye hudons wednesday

hudons would most definetly have them,make sure you get the right size ones,whether its a long track or short track.im not far from hudons and im out to mexico all the time,if they have them,id pick them up for you and meet you in mexico???

Great fishing report,thanks for sharing

north country storage barns,their main office is in philadelphia ny,but they have a site in sandy creek/pulaski.they will deliver right to your house.i have a couple of their sheds and are very happy with them.you can spec out your shed on their website.

i just climbed in my boat and tested the pl-259 antenna connector and it is showing no continuity between the center pin and the outer shield.which i believe is how it should be cause there is a plastic tube that sepperates the the inner core wire from the outer shielding wire.if you are showing continuity between the two,i would think theres a short somewhere in the wire or the antenna itself and if thats the case,trying to transmit with a shorted antenna probably isnt good for the radio.

two thumbs up to elosta and the mexico vfw for having this event.glad to see they didnt cave to the tyrants running this state.im really proud to be an elosta member!!!!!

well jello head is still saying its just temporary,so dont buy that kayak just yet!!!!!lol

nice job ron and randy,you guys are hardcore frostbiters!!!!

im not living in any bubble,im not hiding in my basement,and im not livivng in the woods with the bears,im out in the world living and enjoying my life like a free american.chowder,if i had an elederly family memeber in a nursing home,than i wouldnt be going to a fishing expo with people coming in from all over,thats just common sense,but it doesnt mean that the rest of the world needs to be hididng in their basements and nobody can be out doing what they want.you make common sense decisions for you and your family and everyone else can make common sense decisions for themselves and let the world get back to normal.

aint nothing going to be any different in march or any other month in this state.the panic p*rn ,covid theater,and the fear mongering being pushed in this state will never end.if they want to have this show,they are going to have to move it to florida!!!!!!i truly feel sorry for all the people who put alot of time into making this happen,just to have the carpet pulled out from underneath them,again!!!!!!

there ya go,it will definetly give you little more speed cause of the less drag,good luck with your project!!!!

mcwally,i cant be 100% sure if they were burbot or bowfin,im pretty sure the guy said they were burbot,but if you wanna come down this summer to the little salmon to try for them,let me know,ill sit on the dock with ya and see what we can come up with,ill even supplky the beer!!!!!!

20" might be good if it was a single engine setup,dead center on the transom,but you may need the short shafts with the twin motor setup.im just guessing here,you will have to see where the plates are in relation to the bottom of the transom.

just like big motors,smaller motors come in different length shafts,short or long,i believe short shaft little motors are 15" and long shaft are 20"

did you keep the anti-cavatation plates even with the deadrise of the transom?the anti-cavitation plate is supposed to be even with the keel of the boat.with you going with twins,the motors are now outboard of the keel,so higher up on the dead rise of the transom,thus the motors are too far in the water when on plane causing your rooster tail???

july and august,he gets them right in the marina at mikes

charter boat next to me caught one trolling for browns in the spring two years ago in mexico bay.i know a guy that comes couple times a year to fish for salmon and at night he chunks up perch and puts it down on bottom right in the little salmon and catches quite a few of them.