Jump to content

Zinger11

Members
  • Posts

    277
  • Joined

  • Last visited

Everything posted by Zinger11

  1. I would say most people do not run a flasher with a spoon
  2. If you do run a spoon behind a flasher you have to run it like 5' not the 2 and a 1/2 times the length of the flasher like a fly Sent from my SM-G970U using Lake Ontario United mobile app
  3. Hank would you have a motor coupling for a 1977 120hp mercurser thanks Sent from my SM-G970U using Lake Ontario United mobile app
  4. The problem is 90% of everyone's counters are off. Depending on how much line is on your spool can very your counter quite a bit. I purchased a fishhawk td and was amazed at how much some of my counters were off Sent from my SM-G970U using Lake Ontario United mobile app
  5. Laws and rules of the road Sent from my SM-G970U using Lake Ontario United mobile app
  6. Everything you need to know on one app Sent from my SM-G970U using Lake Ontario United mobile app
  7. I will sometimes run both batteries at the same time but I make sure to keep an eye on my gauge so I don't end up with 2 dead batteries. Worst case scenario I can pull start my kicker and charge a battery with that alternator Sent from my SM-G970U using Lake Ontario United mobile app
  8. I bought my stainless steel ones up at Henderson Sent from my SM-G970U using Lake Ontario United mobile app
  9. The winger separates your lines and causes the downrigger weights to plane away from the boat. This separation is exceptionally good for smaller boats, downriggers mounted close together, boat shy fish, and also eliminates the need for extension on the downrigger arms. Sent from my SM-G970U using Lake Ontario United mobile app
  10. Here is two styles Sent from my SM-G970U using Lake Ontario United mobile app
  11. I've fished when the current was so bad we could only run dipsys on one side at a time depending on what direction we were trolling Sent from my SM-G970U using Lake Ontario United mobile app
  12. That's hard to do because there usually cutting off other boats Sent from my SM-G970U using Lake Ontario United mobile app
  13. Short of getting a Cannon tattoo I've used there products for 30 years but have never come across one of these. Has anyone ever use this? Sent from my SM-G970U using Lake Ontario United mobile app
  14. Last year we did extremely well with MC Rockets soaked in liquid krill Sent from my SM-G970U using Lake Ontario United mobile app
  15. I scan a few channels and my radio will automatically go to 16 but when I'm at Henderson 18 seams the best for info but that fleet is owned by a law breaker so I'm sure they don't care what channels they use [emoji857] Sent from my SM-G970U using Lake Ontario United mobile app
  16. No 18 is what the charter boats in Henderson use that is why I monitor it Sent from my SM-G970U using Lake Ontario United mobile app
  17. when I go out of Henderson I also monitor 18 along with 68-69-72
  18. What's the best release for running them off your planing board Sent from my SM-G970U using Lake Ontario United mobile app
  19. No everything but a scale Sent from my SM-G970U using Lake Ontario United mobile app
  20. This morning in front of catfish creek 60ftow 20 down 3 browns Sent from my SM-G970U using Lake Ontario United mobile app
  21. I have a 9.9 on my 25' and it's been fine. What ever you decide go with a bracket that is rated for the motor or in my case it's rated for up to a 30hp and is solid as hell Sent from my SM-G970U using Lake Ontario United mobile app
  22. I believe unfortunately a lot of people confuse them for browns and keep smaller one Sent from my SM-G970U using Lake Ontario United mobile app
  23. I run a 9.9 on my 25' and it tops out at 5.5 mph.Got me off the lake 7 miles when I blew my big motor Sent from my SM-G970U using Lake Ontario United mobile app
  24. What do you use for a terminator ? Sent from my SM-G970U using Lake Ontario United mobile app
  25. I use braid on my boards so the Releases slide better Sent from my SM-G970U using Lake Ontario United mobile app
×
×
  • Create New...