Jump to content

garrymny

Members
  • Posts

    1,064
  • Joined

  • Last visited

Everything posted by garrymny

  1. Long shaft or short shaft - HOW TO TELL? Just bought a boat. Put my evinrude 9.9 on for kicker, and it got swamped out yesterday. It has a shaft that is about 16 to 17 inches from the mount to the cavitation plate. The model Number says it is a long shaft but I have my doubts. I need a new kicker but I want to be sure I get the right shaft. Obviously longer than my 9.9 has. I see them with 15 inch, 20, inch and 25 inch. HOW DO I KNOW WHICH I NEED, 20 or 25???? Thanks. My boat has the bracket that goes up and down sizzors type. There are 3 holes to adjust the height. Where should the motor caviation late be when down?
  2. Thanks, Decoy Hound. We put the new (to me ) boat on the water today. It worked perfectly. It did take on 5 to 10 gallons of water though. Lost a 25 pounder at the net AGAIN. Father in law has bad knees and he is not stable enough to net them. He feel just as I was leading him to the net. Hook caught net and pop. Gone. Only had 3 bites today and lost them all. I got a 22 foot Grady white, 1982, with 175 HP evinrude that is 1992. Need a long shaft kicker now.
  3. 18 foot Caravelle- Turn Key for Salmon and Walleye-$3000 OBO. Selling my Boat. It is totally set up for Salmon fishing, or Walleye in Lake Ontario and Erie. I finally got a new boat, so this one has to go. Deep V boat. High Sides, very stable. Registration says 18 foot, but it measures about 17 1/2. But, this is a deep, big boat, high sides, closed bow, DRY RIDE 70 HP Johnson, Starts and Runs perfectly. Pushes boat at 22 MPH 9.9 Evinrude Kicker, runs flawlessly. RAYMARINE ST 1000 AUTOPILOT- bought this year. Push the button and forget about steering. Tend your lines, and land your fish. Works perfectly in heading mode, have not tried GPS mode. Lowrance Elite 4 chirp bought last year 3 down riggers, 1 is a Big Jon Electric, Two are Riveria Manual. Only two are mounted on the boat Planer Board Mast, reels new line. (No Boards). You can use mine as pattern and build your own, easy to do for about $30. All interior lights are LED SHORELINE easy load trailer with LED lights, bearings repacked last year and has bearing buddies. Spare tire All tires two years old. 25 gallon under floor gas tank, aluminum. new sending unit. Fuel lines to both motors. Bimini Top. bought last year Boat Cover This boat is not a looker, (exterior) but it is a great fishing boat. The interior is very nice (all NEW). Has built in cooler in the floor and storage in the floor. Only thing it needs is a paint job to make it look great, but for fishing, who cares? Cheap way to get on the big lakes. TURN KEY and go! I have used it extensively the last two years after totally rebuilding the floor, stringers and transom with marine plywood and Epoxy Resin. Totally dry when you pull the plug after a days fishing. You know what you are getting if you buy this boat. I have all the build pictures and I know it is stronger than it was new. Interior is totally newly refurbished with marideck floor, swivels seats, all nice. The Boat needs a paint job if you want the exterior to look good. Video links of boat on lake ontario this summer: https://www.facebook.com/100009592542009/videos/vb.100009592542009/1811313125865088/?type=2&theater https://www.facebook.com/100009592542009/videos/vb.100009592542009/1842212699441797/?type=2&theater I posted some pictures of two years ago, during the rebuild. It was done right, stripped down to nothing but the fiberglas hull. Picture below does not show the Downriggers or Bimini Top. I am located in Clarence NY. 716-481-9875.
  4. Just ordered the Lowrance autopilot and an HDS GEN 3 7 inch. The Garmin Autopilot said you have to buy the more expensive unit for good control at trolling speeds.
  5. Wow, thanks for all the replies. I do want one with its own control head. Connecting to the GPS/fisfinder can come later. I use heading mode on my old boat with raymarine ST 10000 that I adapted to work, and it worked great. Won't work with this hydraulic system After fishing with the autopilot not having one is not an option, I got spoiled. LOWARANCE: Looks like theirs will work. I have a lowrance elite 4 chirp, so I guess it won't work with the Lowrance AP. Not a big deal, I use heading mode all the time anyways. I could upgrade to a compatible Lowrance Fish Finder. GARMIN: Garmin Compact Reactor with control head looks like it will work, but their instructions only show hydraulics with a helm pump that has 3 lines, mine has only two lines. RAYMARINE EV 100 I think will work, but I can't tell from their instructions if it is compatible with my 2 line system. Also, It doesn't say if has the "trolling patterns" that the AP will do, if you want to troll some programmed patterns. The Garmin and Lowrance I think will do this. SIMRAD: need to research that., Behind the steering wheel is a circular thing (helm pump) with two lines coming out of it. it says use exxon univis (110?) or Shell Tellus 10 oil, whatever those are. It is a teleflex system, , but the cylinder in the back connected to the motor say Sytem on it. Anymore input is appreciated. Garry.
  6. looks like Garmin GHP 20 or Lowarance, or a raymarine EV 100 (or 150?) Hope I am right.
  7. Grady White needs an AUTOPILOT- Please help me! Just bought a really nice 1982 Grady White Bimini 220. I want to put an autopilot in it very soon, ASAP. It has two hydraulic lnes coming from the steering wheel, that go to a hydraulic cylinder that is connected tot he 175 HP Evinrude outboard. Only two lines. I am having trouble find what units will work with this old system. There is no electric inlolved that I can see. The cylinder says "syflem" or something, "marketed by teleflex". The steering wheel has reservoir behind it that says put oil in it, and there is a small cap. Says use exxon univis oil. Thank you for any advice you can give. Seems like a simple two line system and the steering wheel just pushes oil through that cylinder mounted tot he motor.
  8. The Medium Chirp setting on my Lowrance Elite 4 chirp, caused interference to my fish hawk. I changed to the high chirp setting and it was okay. The day this was happening there was no doubt of the cause. Since I prefer the medium chirp, I relocated the lowrance transducer to the other side. It helped, and I also can select different transducers in the installation settings mode. Last few times out I have not had a problem no matter what setting I used. It is kind of weird really. I would have to look on the box to see what transducer I have.
  9. is the boat still available? looking for a bigger boat than my 18 ft caravelle. not sure this would be much bigger thouhg, but looks deeper than mine.
  10. garrymny

    Sold / Closed Penn Yan 26

    if still available please post pictures of the inside floor, facing back. Need to see how much room is available for fishing. Thanks.
  11. I am upgrading to a bigger boat. Please list price so we don't waste each other's time. I know my budget, and you know your price. Thanks.
  12. Is the boat still for sale? 716-481-9875 Garry
  13. Sounds like they may be better than blacks if small fish can release them, but you can still crank line down hard on them. With blacks, I sometimes drag fish without knowing it. Sent from my XT1030 using Lake Ontario United mobile app
  14. No problem at all with fleas on my lead core this year. Can't say that for braid, and even get some on 30# mono. Sent from my XT1030 using Lake Ontario United mobile app
  15. thanks for the report. I also noticed friday, on the chart it seems you have to go slightly east of olcott to get 500 and deeper. We did, and didn't do so well, so I think you did the right thing by circling back. I always forget to circle whwre I gt the fish, and I believe in hindsight, it is a mistake.
  16. I'm assuming 200 feet of copper instead of 300 feet (10 colors) of leadcore. Probably same depth, 50 feet, with 100 feet less line. Is this correct? Sent from my XT1030 using Lake Ontario United mobile app
  17. I've had good luck attaching two Yakima spinners directly to the ball, and a clean spoon just above, in the release, about 6 to eight feet back. Sent from my XT1030 using Lake Ontario United mobile app
  18. Nice fish. When I folks say " Laker water" I wonder what that means.??? Sent from my XT1030 using Lake Ontario United mobile app
  19. Hmm, good idea. My partner has bad knees. Maybe I will get office chair. Sent from my XT1030 using Lake Ontario United mobile app
  20. they say 1 to 3. it means it will be 2 to 6. Too rough for me to make the 8 mile run to 500 FOW. I have learned to wait for 2 feet or less, or 1 foot or less forecasts. 1 to 3, is iffy. Last sunday they said 1 to 3 I went out 1 mile and came right back in.
  21. Thanks for the report. Do you run the spoons behind spin doctors, or paddles, or do you just run a spoon?
  22. Forgot to mention, saw no fish and no bait on screen until we hit 180 Fow, then very little. Sent from my XT1030 using Lake Ontario United mobile app
  23. Went out today, August 11. We went out to 500 feet of water. Caught a nice steelhead and then nothing for 2 hours. Lots of boats out there at that depth, and some deeper. Started trolling south and caught 2 more in about 475 fow. Water was 44 or 45 degrees down about 85. Trolled all the way in to 134 for. Nothing. When we got to the docks, an Ohio boat had caught 17! They kept their 3 man limit of 9. Probably one of the boats in the group we saw but we don't like to crowd in so I guess we never got into the fish they were all on. Oh by the way, even in 135 FOW we found 43 degree water down 80. Sent from my XT1030 using Lake Ontario United mobile app
  24. I clean my fish at home. Freeze the carcasses until trash day. But I have read where the fish carcasses are good for the water, saw a Salmon documentary on TV about returning the carcasses to the water. But, as far as the Olcott Marina....if it weren't for the Olcott Marina, I would not have even been able to fish lake ontario this year. They are the only ones with floating docks, and they immediately built a ramp to get to them. Friendly helpful staff too. Good parking. Hot coffee ready at 0600. Nice cleaning station. Nice photo board. CLEAN bathrooms that are OPEN. THANK YOU OLCOTT MARINA! I wish others had the gumption (or fore site when they were installed) to put in floating docks when they knew the lake would not recede all summer. i checked out the wilson dock at the park months ago. NO GO.
  25. Glad you also found it to be good money spent. I was waiting for an update! Mine is still working flawless. Sent from my XT1030 using Lake Ontario United mobile app
×
×
  • Create New...