Jump to content

Brian S

Members
  • Posts

    119
  • Joined

  • Last visited

Everything posted by Brian S

  1. Make sure your ev1 sensor/ compass is secure and properly aligned and all your cable connections are good. The ev1 also has an led that should be green under normal conditions. You could also try doing a factory reset if everything looks ok. You will have to go through the dockside wizard and sea trial set up of it again though. Sent from my SM-G930V using Lake Ontario United mobile app
  2. Don't have the TR-1 as I also have an ev 100 on my boat. The Raymarine evolution series is designed for boats with hydraulic steering. I have always heard guys speak very highly of the TR-1 though. Hodges marine has it for $2048 and the remote is pictured with it. It is possible that garmin sells a kit without the remote at a different price. Raymarine sells kits with and without the drive unit in their evolution series which makes a big difference in the price of the kit. Sent from my SM-G930V using Lake Ontario United mobile app
  3. Hodges marine at $1999 also. I bought my ev 100 from them last month, decent shipping time Sent from my SM-G930V using Lake Ontario United mobile app
  4. X2 on this exact set up. The sams release is adjustable enough so it doesnt false release under those conditions. A decent king will surely pop it open though. Between the sams release opening and your drag loosened, the board should stay on top of the water. Just let the fish take line and fall back behind your other lines(boards or divers) to the middle before working him in. Big boards on my little boat were a pain so i switched to inlines. Both have their pros and cons. Sent from my SM-G930V using Lake Ontario United mobile app
  5. Took a buddy and his son out yesterday. His second trip and his boys first. Setup on a NE troll in 100ft of water. Kept the spread simple as i am new to the sport myself. 2 riggers, 1 wire dipsy, and my first time using copper....a 300ft rig on an offshore mag inline board. First hour just a few little shakers. I figured we had another one when I saw one of the rigger rod tips twitching so I hopped up, grabbed the rod and tried to release the line from the weight. At about the same time I figured out I was pulling on the fish, the fish figured out it was hooked. Good one on! Handed the rod over to my buddy as the fish took off. He finally slowed down 300+ feet later and dad and son worked together to get him in. Solid fish, checked in a tick over 19lbs. Landed a 17 lb on the copper, a couple more shakers, and lost 2 good ones in the prop wash. Most action between 140-160 ft and 50-80 feet down. Moonshine and Stinger spoons. Fished 6:00-10:00 but the bite turned off by about 9:00. Fleas were getting bad by the time we started pulling rods. Didn't see many other boats.....maybe others went out deep? Sent from my SM-G930V using Lake Ontario United mobile app
  6. SOLD Sent from my SM-G930V using Lake Ontario United mobile app
  7. Sold pending payment Sent from my SM-G930V using Lake Ontario United mobile app
  8. Cant open the pm. My cell is 585 519 9813. You can call or text. Thanks.....Brian Sent from my SM-G930V using Lake Ontario United mobile app
  9. 2 Cisco rod holders. One is roughed up a little at the top but doesnt affect the way it works. $100 for the pair. Located in Conesus, but work in Rochester. Sent from my SM-G930V using Lake Ontario United mobile app
  10. 4 Cisco mounts for Lund's sport trac. The knobs on one of them are a little rough but it doesnt affect the way it works. 25 bucks each. Located in Conesus, but work in Rochester. Sent from my SM-G930V using Lake Ontario United mobile app
  11. Two medium light 7 foot ugly stiks. They are 1 piece rods. $40 for both. Located in Conesus, but I work in Rochester. Sent from my SM-G930V using Lake Ontario United mobile app
  12. As far as determining hard over time, per the Raymarine forum I centered the rudder, then hooked the motor/drive leads up directly to 12 volts to drive the rudder to one side. Reverse the leads and drive the rudder all the way to the other side while keeping track of how many seconds it takes. I'd post the link, but don't know how to on this site.....sorry. Mine is an EV-100, but I think the same method might work. Sent from my SM-G930V using Lake Ontario United mobile app
  13. I had to laugh at #3 for your lessons learned. Definitely been there! Congrats on your personal best. Sent from my SM-G930V using Lake Ontario United mobile app
  14. Nice fish, congrats! Unrelated, but what kind of boat are you running? Sent from my SM-G930V using Lake Ontario United mobile app
  15. 2 silver Cisco rod holders with indexing base. Mint condition. $80 each. Prefer pickup. Live in Conesus, work in Rochester area. Thanks. Sent from my SM-G930V using Lake Ontario United mobile app
  16. 2 sections of 48" track. Used, but good condition. No hardware included. Conesus area, but work in Rochester. Pickup only. $150 Sent from my SM-G930V using Lake Ontario United mobile app
  17. Title says it all. Very good condition. Mounts were used on a Lund sport trac with the 45 degree angle. Conesus area, but I work in Rochester. $30 each. Sent from my SM-G930V using Lake Ontario United mobile app
  18. Just throwing out another option, never said it was cheap..... Sent from my SM-G930V using Lake Ontario United mobile app
  19. Google search Sea Star kicker cable tie bar. It looks pretty versatile. Sent from my SM-G930V using Lake Ontario United mobile app
  20. Sold pending payment. Will update Sent from my SM-G930V using Lake Ontario United mobile app
  21. Have a pair of these reels in like new condition. They have 14lb mono on them. $70 for the pair. Located in Conesus, but i work in the Rochester area. Thanks Sent from my SM-G930V using Lake Ontario United mobile app
  22. 4 Okuma Classic Pro rods. 7'6", medium action. $40, local pickup in Rochester area only. Thanks. Sent from my SM-G930V using Lake Ontario United mobile app
  23. You have a pm Sent from my SM-G930V using Lake Ontario United mobile app
  24. Pair of Okuma Magda 30s. Mint condition. $70 for the pair. Can ship for an additional 5 bucks. Thanks. Sent from my SM-G930V using Lake Ontario United mobile app
  25. Big Jon planer mast. Used once so pretty much brand new. Selling because inline boards work better for me on my small boat. $150. Local pickup only. Rochester area. Thanks Sent from my SM-G930V using Lake Ontario United mobile app
×
×
  • Create New...