harschsj

Would you sell just the mag10 downrigger? 

Does anyone have a pair of Shark Weight Cannonball Holders for sale? Thanks!

On 7/31/2011 at 2:51 PM, High Bidder said:

I noticed today that I almost lost the bolt that secures the downrigger to the base(new Model). Apparently there is a retaining washer on the bolt that came off and the bolt was barely hanging on the base. I was lucky it didn't fall out as I had the base turned so the bolt was outward. So this is just a word of advice. Keep your base turned so the retaining bolt(with knob handle) is facing the inside of your boat so if it falls out it will land in the boat. I now stocked extra SS bolts in case I lose one. I also am going to machine a small groove in the bolt and install a spring clip.

High Bidder

Hey do you have a photo of what you came up with for a fix for this. Running into the same issue with my riggers. I like keeping the bolt where it is but don’t care to lose the bolt. Thanks! 

$100 for a set of Cannon Downrigger Flash Weights, used for 1/2 season, Pickup Orchard Park, NY

okuma glt's have been good to me

Anyone have any of these magnum dipsys for sale or know where to get any? Preferably looking for a pair of them and in black. Thanks! 

I walleye fish 80% of the time so I’ll just be pulling worm harnesses off the dipsys. But I figured to keep it simple just run spoons off of them for salmon to prevent tangles from occurring. Thinking of running 9ft joins glt outer and getting 8ft okuma glt for inner rods 

1 hour ago, Totally Hooked said:

We run double dipseys most days unless current is challenging. Here are a couple pics of which holders we put them in. 
 

The holders circled In red are where we put rods. You can also see them deployed in the one pic. Excuse the pic of my wife, just happens to be the only pic I have of rods out. Like others said, set on 1 and 3. I also tip the inside rod up one click on the holder, not sure if that’s right or not but works for us. 
 

 

What size rod lengths are you running? The set up you have behind your wife is something i am looking at running, thanks!

Thanks! I get the dipsy setups and settings just looking for info and recommendations on rod spacing and what I should do for rod lengths. 

Asking for some help/advice, 

I own a 21ft trophy, i currently run 1 wire dipsy off each side of the boat. I have traxstech 6inch track mount with rod holder for each dipsy. I am looking into running 2 dipsy's off each side of the boat. I was waiting for the Niagara Falls show to ask them these questions but now that it's cancelled I am reaching out to you guys for help. How far apart should I have each rod apart from each other, i currently run a 9ft okuma glt rod, should my other rod be longer than that going up to a 10ft or you recommend going with a shorter rod about 8ft. Not sure if i should buy another 6inch track for the mount or just buy maybe a 18inch or 24inch track mount to house both of the dipsy mounts on each side of the boat. Any help i would greatly appreciate!

9 hours ago, Kilam Custom Baits said:

Let me know i will trade you for them. A lot of people say they fill with water, but i repaint and re-seal them and have zero issues

I like that paint color! 

Bump

Looking for a mag 10stx. Let me know if you have one available. Thanks!

As the title says, Looking for 2 newer style Cannon Mag 10 downriggers for sale. Looking to upgrade from my older Mag10's. Located in Buffalo, NY. Thanks!