JCG

All great suggestions. Thanks for the reply

Hmmmmmm good point I’ll try that thanks. That would be odd consideration both units worked as they should have last year.

I tried that but probe depth was still inaccurate. I called FishHawk and the suggested boosting the gain also. If that fails, fill out work order and send probe in for testing.

Would b strange since it operated flawlessly last year. Only variable that changed was we were out in deep water.

Thank you.

Hello, I have a late 80’s Thompson 210 Fisherman with a Bimini top. Had the floor replaced due to spongy area. I also had a custom cover made. The boat is collecting a significant amount of water after moderate to heavy rain even if covered. There’s a hole located in the step down area to the cuddy. Looking down water looks to be ponding there sometimes after a heavy rain the water may rise above the hole. Boat always requires manual or bilging out before leaving the dock. With a little speed more water will flow to bilge requiring flipping bilge switch back on until full plane is achieved to remove all the water. I’m suspecting when the floor was replaced the drain passage to the bilge was blocked or eliminated. Once the boat is trying to achieve plane the water will find its way to the bilge! Ugh PITA!!!!!!

Hello guys, last year no issues whatsoever. First time in the water this year fishing deep 90-110 fow all functions working correctly except inaccurate probe depth readings. Rigger down 90 -105 fow probe is reading only 14 or 17 feet down??? Tried new batteries and increasing the gain but no change!

Hello all, long time lurker just became an official member!!! Home port Wrights Landing Oswego NY. Let the games begin. Good Luck to all!