Pictures of rigged boats

[SHAWN HAYES]

Just looking to see the differences in the way people rig their boats. I have a Lund 2150 baron Magnum and I would like to see how other guys have rigged theirs up. Always looking for new ideas or ways to make things better or more ergonomically friendly.

[Gray Fox]

Don't really have any good pics of the way I set up the boat, but here is one that you can kinda see the rigging.

[Tim Bromund]

here's an older pic of mine the old cannon mag 10s are gone and an additional big jon HD holder on the gunwale in their place

Tim

[Jax]

This is a smaller image but can give you an idea, the rod holders on the sides just for storage come in very handy for getting rods out of the way, you can never have enough storage. I think I may have some more pictures if you would like. Gotta love Lunds!

[Justin]

Is that an open bow? If not how hard is it to pull the boards back in. I am just about finished with the rocket launchers which i think will be a lot easier to run the boards off of.Will post some pics when it is completed.

[Frisco]

I have a Lund 1950 Magnum I'll forward pictures this weekend!

[K Gonefishin]

Here is how I have my Ranger rigged, triple Cisco's on custom quick detach rail mounts, I also added Cisco Crades, 6 inch bert's tracks with Vector double rod holders. The Cradles are awesome for divers.

[motocross]

[Frisco]

I mounted a swivel base for the two rear Big Jons and I add a 24" Traxs Tech rail for the front down riggers and rod holders. In the winter I have extra spools with planner board line that I use on the front big jons. I slide them forward and tip them up and use them as plannerboard masts. I use Otter Boards so the pull isn't severe. On the left of the dash the !st black box is the simrad Auto pilot and next to that is the Troll master. The only thing that I would do different is I would use 36" rails. I balso added carpet to the Gunnels!

[Steve L]

I'm new to the forum but would like to put my 2 cents in. My striper has 4 riggers, 32 rod holders, and run Planer boards off the front of my hardtop with reels mounted on the railing. All 4 downriggers are on swivel bases drilled with extra pin holes to run at various angles depending on the conditions and number of rods run. I hope the picture comes out ok as this is my first post.

I run wire dipseys or braided dipseys off the side rod holders running 2 on each side, 7' rod paralell inside a 9 1/2 foot rod. Downriggers sometimes stacked, Lead core off the hardtop rocket launchers with very little drag and will sometime run in line boards instead of planer boards if I only have two people on the boat. Just to name a few of the many combinations. Have not run any copper yet.

I thouroughly enjoy the LOU site and look forward to sharing as I am able.