Big Jon Riggers/ Electric Planer Reel?

[Hookedup]

Hi Folks, I am installing my Big Jon electric planer reels. The wire for the switch is set up to be installed to the motor with wire connectors, then at the battery it uses standard two pole connectors, like what would be used on riggers for quick disconect. It would be a much better set up if big jon had a disconect at the planer motors. That way you could take the mast off without cutting wires. Where can I get two sets of two pole connectors for riggers / electric planer mast motors, so I can rig up my own quick disconnects. The big jon motors are running 14 awg for the power supply. All of the two pole connectors I found on line were only rated for 5amps. I was going to cut the cords off my old cannons but I desided I best not. Sean

[ERABBIT]

Over kill but may work :

http://shop.genuinedealz.com/Items/gim- ... ay%2012AWG

[lakebound88]

Sean, i can hook you up. i make wiring harness' everyday for equipment, im sure we can make one for you.

[Hookedup]

Thanks for the info guys, I see they have some good deals on wire on that site. Sean