Otter boats

[Todd330]

When tying your otter boat, does the 14 by 9 pretty much work or should I shorten up the back so they pull out a little harder? Has anyone just drilled and put an eye in the side and hook dorect???

[Hookedup]

I think you need the rope, but some guys that pull heavy copper on hear should have the measurments to use. I need them myself I am replacing my cord. Sean

[Landshark]

just use whatever they call for. it pulls copper fine. if u have the instructions they will work.

[final flight]

here's what works for 600' of copper....9.5 in. front 11.5 in rear. redrill holes 1/2 in lower on board (directly below factory holes) rollie

[Hookedup]

Rollie do you redrill both holes 1/2 towards back of board? and are you moving the holes for the tow line or the weight? Thanks Sean

[Yankee Troller]

We use the 9.5 and 11.5 hole to knot lengths too. Pulls all my coppers just fine.

[spoonfed-1]

9" from the front to the knot 14 " from the back to the knot according to Big John.

You drill your holes 3/4 of an inch from center to center lower on the board (towards the bottom) straight down from the originals. Sean this is for the tow line holes

They will pull like hell.

Glen