Blacks releases ??

[June First]

I've got a question on using Blacks releases..... is there any way to attach the line to the release without it slipping? I followed the directions on the package, (twisting line before attaching to release) and the line slips when I preload my rod tip. Within minutes I have zero setback

I like the idea of these releases and really hope someone has a suggestion. Many of you use these releases and I am sure someone here can help me out.

Thanks

[GAMBLER]

Put more twists in the line. I have never had it slip.

[FISHSTALKER]

Brandan - Use rubber bands.

[June First]

Gambler, how many times do you twist the line?

Dale, I plan to try the rubber band trick this weekend, never tried before.......

[GAMBLER]

I twist it around 10 times.

[bluewater]

Gambler is correct you need more twists in the line I had the same problem when I first started using them now no more problems 8-10 twists is minimum.

[June First]

Great! Thanks for the help, I will give them another try

[rshubuck]

Diddo! At least 8 to 10 twist. More does not hurt. I love my Black releases.

[LongLine]

JF - You have it on the right way? If you put it on upside down, a loaded rod may release it. The hinge should be up. I've never had them slip with only 4-5 twists. (8-17 Lb mono & co-poly)

Tom B.

(LongLine)

[June First]

http://www.lakemichiganangler.com/store ... s_RC95.jpg

longline, I assume I am running it right side up....... Does it run like this photo?

Thanks

[ Post made via Mobile Device ]

[Richard]

yes, just like the photo. Rigger weight in the clip. 8 to 10 twists. no problems with 6 to 30 pound test.

Richard

[LongLine]

JF - Yep that's it. I'd like to know how you're twisting the line. If twisting comes undone & you only end up with 3 twists then it will definitely slip. I never go over 6 because with mono, if you troll too long the twist will cut into the line. It'll become a weak spot and you'll be able to feel the distortion in the line when you reel it in.

Tom B.

(LongLine)

[June First]

I make a loop with the line, stick my finger in the loop and rotate 6-8 times. What is the right way?

Thanks for the help

[rshubuck]

Thats is how I do mine!

[LongLine]

That's the way to do it. You've got me stumped. What kind of line are you using? Is it really stiff? Iused to use Maxima before they stopped carrying bulk spools around here & have switched to P-Line with good sucess.

Tom B.

(LongLine)

[June First]

15 lb mono(Cajun red).... I will try again this weekend being careful with the wraps.

Thanks again everyone with the advise

[ Post made via Mobile Device ]

[June First]

They worked great!

Thanks for the help guys

[ Post made via Mobile Device ]