HELP! Cannon speed N temp

[slapshot]

I need your guys help with my new cannon speed-N-temp unit. How or what is the best way to put on the coated cable on the down rigger? Thanks to all who offer their wisdom.

Tony

[Don Supon]

Remove 6 ft. of coating from end of cable (burn off) and attach to spool. Make sure the uncoated cable makes contact with the set screw located in hub. Easily done by loosening spool tension and making first few wraps by hand turning the spool. Contact the set screw as many times as possible, tighten the tension, then power wind the remainder of cable .

[adam2000]

Also you want your release above the probe. I run my cable through a blacks release and I put a yellow offshore release on the cable to hold the blacks in place.

[ Post made via Android ]