Deployment Question...

[tcon]

A friend of mine wants to get into running copper. If he's running 2 riggers, 2 dipseys, and 2 coppers<------on big boards what is the order of deployment and what should he have his dipseys set on ? I know this question has been asked before but I'm not into seaching tonight Thank you in advance.

Tom

[spoonfed-1]

I set my riggers first dipsys second and copper third since it takes the longest to get out.

Glen

[adam2000]

I do mine same as above. But you can go in any order you want

[ Post made via Android ]

[Tim Bromund]

I always let my starboard diver out first and let it slowly fish it's way out, creeping out on a light drag as I'm deploying the probe rigger. You'd be surprised how many times that creeping out diver gets whacked up high out of temp before I can even get the probe rigger in the water. Then same scenario on the port side. Cores and coppers go out after the divers and riggers are set.

Tim

[adam2000]

Mid summer I like to get about 120 ft of wire out then let it creep. When running 2divers. When running four ,ill get inside divers creep both sides while I get a copper out. Then let the high divers go. This yr has been a little different. Cause usually a rigger will pop before you get to any of that. Lol

[ Post made via Android ]