Jump to content

Recommended Posts

Posted

I had a problem with the first spool I bought, they replaced it and I didn't have any trouble all season unless I got to wirers wound together and I did. :o:( .

Posted

I ran the tips this past season on a pair of Talora rods, and I'm going back to Twili Tips next season. In our experience, we found that we needed to be really careful when putting the wire dipsys into the water. The Torpedo tips have two sections that are attached via a screw at the main roller. The first part has a mini line guide and the roller itself, which are in-line with the blank. The second, top part has a tip top that rotates 45 degrees right and left to accommodate quick runs near the boat and can also collapse 180 degrees. For example, when you store the rod with the swivel attached to a guide, the tip top is facing the reel.

We found that both rod and roller tip position were crucial when deploying the rig. When we deployed the Dipsy without making sure that the tip top was in line with the other guides on the rod and fully extended, the line wouldn't flow off the reel, and the force of the Dipsy as it entered the water combined with the 180 degree bend in the wire would cause it to break. We lost several rigs that way. If we paid really close attention I'm sure we could have avoided this issue, but none of us on the boat are newbies and we all decided that in the midst of chaos simplicity rules. Hence, back to twilis. In all fairness, this issue may be unavoidable, and may be associated with roller tips in general, so it's not a knock on Torpedo, although I can conceive of a design fix...

BTW, if anyone wants to try the Torpedos, I'll have a pair of them for sale cheap on here in a couple months ;)

Posted
What were the problems with the Torpedo wire?

I don't think anything is wrong with the wire, they are talking about a roller guide tip that Torpedo makes that you can attach to the top of your rod. Torpedo wire itself is good quality.

Posted

The first spool I bought wasen't layed on the spool right and it wouldn't come off right and made a big mess,Torpedo replaced it and everything has been fine. ;)

  • 3 years later...
Posted

I ran the tips this past season on a pair of Talora rods, and I'm going back to Twili Tips next season. In our experience, we found that we needed to be really careful when putting the wire dipsys into the water. The Torpedo tips have two sections that are attached via a screw at the main roller. The first part has a mini line guide and the roller itself, which are in-line with the blank. The second, top part has a tip top that rotates 45 degrees right and left to accommodate quick runs near the boat and can also collapse 180 degrees. For example, when you store the rod with the swivel attached to a guide, the tip top is facing the reel.

We found that both rod and roller tip position were crucial when deploying the rig. When we deployed the Dipsy without making sure that the tip top was in line with the other guides on the rod and fully extended, the line wouldn't flow off the reel, and the force of the Dipsy as it entered the water combined with the 180 degree bend in the wire would cause it to break. We lost several rigs that way. If we paid really close attention I'm sure we could have avoided this issue, but none of us on the boat are newbies and we all decided that in the midst of chaos simplicity rules. Hence, back to twilis. In all fairness, this issue may be unavoidable, and may be associated with roller tips in general, so it's not a knock on Torpedo, although I can conceive of a design fix...

BTW, if anyone wants to try the Torpedos, I'll have a pair of them for sale cheap on here in a couple months ;)

 

 I am handicapped and use these for rod with heavy braid, fishing from a wheelchair I can't always face a fish if it makes a run left or right so the swivel helps. I will buy your used tips1 I am new to this site so how will you contact me? Not too wild about posting email on open blog - BSMITH8592

post-162016-0-13153600-1476217542_thumb.jpg

Posted

The first spool I bought wasen't layed on the spool right and it wouldn't come off right and made a big mess,Torpedo replaced it and everything has been fine. ;)

I remember that

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...