steering with a kicker?how?

[Meals-On-Reels]

Here's what's on my 9.8 Tohatsu-

(Edit- actual pics in post below this one)

http://postimg.org/image/w044wgaad/

http://postimg.org/image/iaomg2jxr/

Here's the extra end I have-

http://postimg.org/image/oacdjq4q7/

Here's the setup on my 5HP where it already had a hole through it.

http://postimg.org/image/4v1lqmbfz/

If the part I have works you can have it if you want. It might be too small. I'll check for some flat-stock to rig up another like on the bigger motor.

Edited June 13, 2013 by Meals-On-Reels

[Meals-On-Reels]

Sorry- pics from my post above...

[salmonite]

That's a great idea! Better than drilling. I did find the holes jimski was talking about. Going to try to use the holes and then if that fails will try the bracket idea.

Edited June 14, 2013 by salmonite

[Little Crappie]

I had a 97' Honda 9.9 with the handle shown in the pick you posted and I just drilled 2 small holes made a triangle out of some small metal links and used the ball to connect the 2 pieces and it worked perfectly. It took 5 sec.

[Speed]

Here is a picture of what the bracket looks like on my 9.8 Nissan - The bracket came with the motor when I bought the motor used from someone who had a steering wheel cable connected to it.

 

 

 

 

[salmonite]

Boom!!! Thanks guys for ideas and jimski for pointing out the 6mm holes underneath the handle!!

[Kuba]

Looks professional: ) did you test it out yet?

[salmonite]

Looks professional: ) did you test it out yet?

 

just in the driveway... seems to work pretty well but we will see i am trying to get out this weekend