Fish Hawk X-4 Default settings

[reeladdiction2]

A used fish hawk x-4 came with a boat I recently purchased.  I believe that the settings are not default.   The down temp reads 5.00 is stead of 50.0.   Does anyone know how to recalibrate the unit to return to default settings. Are the default settings not accurate?   Any info would be greatly appreciated!

[Tim Bromund]

Is it maybe set to display Celsius instead of Fahrenheit?

[Don Supon]

Calibrating the Sensors-Screen # 4

 

To set the parameters, use the SET button.

Press the Set button until the sensor reading flashes for the sensor you want to adjust. They are from top down: surface temp, surface speed, probe temp, and probe speed.

 

Once that sensor reading flashes press the UP or DOWN button to adjust.

 

Please note that the factory calibrated values are denoted for each sensor by a missing decimal point. If you wish to go back to the factory settings press the UP or DOWN arrow until the reading flashes without a decimal point. The factory default value is always in the middle of the adjustment range. Once the reading flashes without a decimal point, press the SET button and the factory default will be restored.

[Mower]

You can download the user -owners manuals on their website.

[reeladdiction2]

Talked to the main man for fish hawk.  Got to send it away for a rebuild.