ANYBODY OWN A SEA NYMPH GLS 195

[appleo]

i REMOVED THE FLOOR TO REPLACE WITH NEW

 

I WANT TO REPLACE LIVEWELL HOSES WHILE FLOOR IS OUT

 

ANYWAY TO PULL NEW HOSE WITHOUT REMOVING GAS TANK AND FLOOT TIN LOCKER?

 

HOSE APPEARS TO BE STUCK

 

APPEARS HOSE IS 3/4  PUMP  AND 1-1/8 DRAIN?

 

ANY FEEDBACK  THANKS

 

I CHECKED FOAM WITH 2 PLUGS ANDLESS THAN  1/4 " WET SO IM GING TO LEAVE IT

 

AM USING SCREWS FOR NEW FLOOR...AND INSTALLING CARPETED PANELS..

 

 

[dick black]

the hoses are probley adheared to the flotation material, I just did my 195 and could not get the hoses to budge, i used plugs to plug the inlets and let it go at that, just wasn't worth the problems. last year i did the same job on a different boat and the hoses had been wrapped in some sort of paper from the factory. was able to connect new hoses to the old ones via a hose coupling and clamps and pull the new hoses thru, it was quite a job but i made it work. not so lucky on my own, good luck

[Patriot]

I had the same problem with mine, so I just don't use it. However, if you're looking to refinish your floor, I used These guys three years ago and the floor is still going strong. Easy to apply and easy to clean. I used 5/8" pressure treated plywood flooring and screwed it down with big flathead stainless screws.

http://durabakcompany.com/