Downrigger coming up real slow

[tcoomb83]

I have mag 10 a riggers and im new to this I just had the circuit board replaced by screwy luies in fairhaven and I took it out to try it lastnight and I could barely get the weight back up I had to keep resetting it..I no the powercord looks lkke a indoor extention cord ..could that be the prob? Any ideas please. .the other rigger is set up the same way and works great

Sent from my SAMSUNG-SGH-I337 using Lake Ontario United mobile app

[hitechmike]

If the rigger your having trouble with is the furthest from the batteries, then yes its possible you need to up the wire size. Remove any splices. 

[tcoomb83]

Ok I will try that first thank you..do u recommend the cannon quick connect cable

Sent from my SAMSUNG-SGH-I337 using Lake Ontario United mobile app

[hitechmike]

You can do that.  I ended up using the cigarette lighter type connection.  But will probably change that out.  Kinda cheesy.  I needed to be able to take my riggers off easily for fun in the sun action

[tcoomb83]

I hear that thats why I want the quick connects

Sent from my SAMSUNG-SGH-I337 using Lake Ontario United mobile app

[mjones 59]

I had the same problem with mine. Brandon at screwy Louies said that the gear case was out of grease.

I'm sure that he would have done this. Make sure that the clutch knob is tight (counter clockwise).

I burned out the second board that I had installed.

[ray koziatek]

in the driveway swap rigger to other side with good function if it works its the .wire

Edited August 7, 2013 by ray koziatek