starting up NMEA network

[fishdawg]

I am looking to connect a Lowrance Global Map 3500 to my Lowrance x19c via the NMEA network... both units have NMEA leads coming from their power lines

I am also considering adding my VHF radio to the network...

where would I begin ?

[CaptSpike]

I'm assuming it is a NEMA 2000 network and all devices are NEMA 2000 compatable (most newer units are). If this is the case you need power T and enough cable and T's to connect all your devices. Depending on how much you want to add to the network it can get pretty complicated, but basically the end goal is to have all your units talking to each other. This webiste gives a good layout of some typical networks and what you need to get it done. Also highl;ights some potential issues and how to avoid them: http://www.nmea.org/Assets/2012%20ibex%20full%20%20nmea%20installation.pdf

My Garmin G10 came with the NEMA 2000 network pieces unfortunately my FF was only NEMA 0183 comaptable. I installed the network anyway for when the FF gets updated.

Good luck.

 

Spike

[fishdawg]

ok thanks Spike

yes both are 2000 compatable and I may likely upgrade the Global Map to a HDS 5 or something similar...

Ive given that PDF a read... thanks!