Jump to content

Recommended Posts

Posted (edited)

post-149957-0-84040500-1396816462_thumb.jpgpost-149957-0-40025400-1396816479_thumb.jpgpost-149957-0-31772100-1396816494_thumb.jpgpost-149957-0-27772800-1396816510_thumb.jpgparting out my boat stuff to save up and buy my 'dream' boat. I just don't want to put the time or money into restoring this boat when I can just use that money to buy the boat I really want.

 

next up I got a full outdrive - the lower unit is an alpha 1 gen 1 that I had purchased from maximum marine in ancaster Ontario. the place checks all internals and replaces any parts out of spec and put new seals and gaskets in it. lower unit is perfect order. along with it is a 13.75x21 pitch prop with the merc flo torque hub.

paired is a MC-1 upper drive also in perfect running order. the front cavitation plate has a piece broken off of it but doesn't affect performance (see picture)

the water pump is 1 season old but I always recommend replacing it to make sure no problems. will need the small o-ring that goes in between the halves for the oil passage way

 

will not go lower than 500 bucks for the whole outdrive!!

 

I also have some various gimbals and transom plates. 1 gimbal is the older style that does not have the trim switches on the sides and does not use the rubber type transom seal - this one does have a brand new gimbal bearing! - MAKE OFFER

 

2nd gimbal assembly is the mc-1 newer style that has the rubber seal and side trim switches that I used last year

- will need new switches and new seals, gimbal bearing it just needs a rebuild but is a good candidate for it.

- MAKE OFFER

 

also I have an mc-1 lower unit. I got this with a pile of outdrive stuff from a guy when I needed a good upper unit. I do not know the condition of it and don't know if it is in good working order so this I will just say buyer beware. - make any offer!!

 

got the old style trim pump mc-1 - this was working all last year for me so I can say this in fact does work - make offer!

 

next up a LOWRANCE m68c s/map with transducer. it does have the mounting brackets for the ducer and unit.

- 100$

 

 

Schumacher battery charger. works great and used a few times it is not 2 years old. charges all types of batteries and charges at 2,6 and 10 amps.

- 50 dollars

 

have a gas tank from my boat with brand new 1 season old vent hose approx. 9 feet long. gas tank measure 18'' wide 60'' long and 5'' tall+3'' taller for the tank fittings - holds 95 litres. it holds pressure but I don't know if the fuel sender works as I never had a gas gauge.

- 40 dollars

 

I have a handheld MIDLAND VHF radio with chargers and mounting bracket.

 - 40 dollars

 

 

also have a BRAND NEW engine and dash wiring harness for the merc 140hp engine - please see my other link here on LOU for it - http://www.lakeontariounited.com/fishing-hunting/topic/42679-brand-new-engine-harness-and-dash-harness-mercruiser/

 

last but not least!!! an aftermarket steering wheel and hub to make your boat feel/look more fancy shmancy lol nothing special to say... its cool and I like it

- 30 dollars

 

 

make offers mean just that make a decent offer and chances are I will not refuse it.

 

all of this stuff is located in Elmira, Ontario not new York lol but I live in Guelph and can meet around the tri-cities for the right price.

 

pictures:

 

post-149957-0-61228600-1396816090_thumb.jpgpost-149957-0-63476600-1396816105_thumb.jpgpost-149957-0-11506100-1396816116_thumb.jpgpost-149957-0-32241300-1396816146_thumb.jpgpost-149957-0-99635500-1396816167_thumb.jpgpost-149957-0-83960500-1396816228_thumb.jpgpost-149957-0-76460000-1396816254_thumb.jpgpost-149957-0-32121200-1396816279_thumb.jpgpost-149957-0-75545500-1396816308_thumb.jpgpost-149957-0-08945400-1396816333_thumb.jpgpost-149957-0-99853700-1396816348_thumb.jpgpost-149957-0-04798300-1396816365_thumb.jpgpost-149957-0-08368500-1396816385_thumb.jpgpost-149957-0-16866000-1396816405_thumb.jpgpost-149957-0-00317300-1396816426_thumb.jpgpost-149957-0-02441000-1396816443_thumb.jpg

 

 

 

 

 

****ADDED****

also have 4 attwood rod holders pictured below!  all 4 for 50 bucks - these are very strong heavy duty plastic!!

post-149957-0-37732800-1396959190_thumb.jpg

post-149957-0-75362100-1396827460_thumb.jpg

post-149957-0-27404100-1396827511_thumb.jpg

post-149957-0-34249100-1396827734_thumb.jpg

Edited by fieromx3
  • 2 weeks later...
Posted

1st post updated. engine sold. everything that that is listed is still for sale

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...