2012 Mercury Not Starting

[KilliansRed]

Ive got a 2012 60 Horse Mercury EFI. Went to fire it up Sunday and nothing. It doesnt even turn over. Put the battery on the charger and it went straight to a green light. I checked all the fuses and they are good. My bilge pump, livewell pump, horn, recirculating pump and lights work. My gauges, hydraulic tilt and motor do not work. I've run the boat 7 times already this year without an issue so im pretty confused. Im just looking for any thing to try or anything I missed before I drag it to a mechanic. 

[Sealegs]

I don't want to be insulting, but I've done this.....you checked the kill switch/lanyard and popped it in and out of gear, right?

John

[KilliansRed]

Yes, kill switch was set correctly and it was in neutral, Done that a few times myself.

[Kuba]

Fuse?

Sent from my Lenovo P780 using Lake Ontario United mobile app

[KilliansRed]

Fuses looked good, gonna change a few anyway.

Sent from my LG-LS720 using Lake Ontario United mobile app

[Kuba]

I would say kill switch, do you get any power to trim?

Sent from my Lenovo P780 using Lake Ontario United mobile app

[Shellback]

I'd start at the battery. Remove and clean the connections, no matter if they look good or not. Then go to the battery connections at the motor, probably at the starter solenoid. Next there are fuses under the cowl of the motor. Another check would be the harness connection to the dash, under the motor cowl. 

[KilliansRed]

No power to trim. Gonna head up tonight and try again, thanks for the suggestions.

Sent from my LG-LS720 using Lake Ontario United mobile app

[Sealegs]

Did you solve this? I have the 2013 60 hp so interested in the resolution. Thanks

[xstreamguideservice]

Had it happen on my walleye boat. It was the neutral safety switch .

Sent from my XT907 using Lake Ontario United mobile app