Name this part

[floatfisher]

Can anyone tell me what the part is on the bottom of this picture. It is a brown plastic "T" that goes into the carb, I think. It was leaking gas as I tried to prime the engine and when I touched it it broke off.

If you know the part, the next question is where can I get one.

I had planned on going out on Keuka with my son and a couple friends, now we are going to try the pier in Watkins. While up there I will be checking with one of the marinas to see if they may know the part and if they have one.

Thanks for any help!!

Sent from my XT1060 using Lake Ontario United mobile app

[Frogger]

Fuel manifold line. Boats.net might be able to show you part number and provide information to call around to marinas. Might luck out.

Sent from my iPad using Lake Ontario United

[Total Chaos]

Try this, I'm sure it would work.  http://www.mcmaster.com/#standard-barbed-tube-fittings/=ss9kzb

Total Chaos

[floatfisher]

Thanks for the help guys. I. I figures out that it is called a T check valve. I wondered if there would be anything in McMaster, I may be able to find something at work. We are always ordering stuff like that from McMaster to work on my melters.

Thanks again!

Sent from my XT1060 using Lake Ontario United mobile app

[Shellback]

Is the fitting threaded where it goes into the carb? If so, you might be able to change it out with brass components. In fact, I'd try and change out each one. Could be ethanol gas deteriorating the plastic.