Jump to content

Recommended Posts

Posted

I am switching my rods up for this season and then on. I am currently switching over to Shimano Telora rods only because I am a Shimano guy reels included. My reels will all be Tekotas this year but for my rods I currently have the roller rods for copper and dipseys, but for my rigger rods I usually run a medium for trout and a medium heavy for the salmon both in the 8 foot length. Does everyone run separate rods for salmon and trout or am I just anal about my gear ? I mean the boat is only so big and I currently carry about 16 different rods on the boat for all purposes copper, leadcore, dipsey, trout and salmon trolling. Just trying to eliminate some if I can but don't want to sacrifice action and fish if needed. Thanks for your guys help.

Posted

I guess I don't qualify for an opinion because I am worse than you....I carry 10-12 rods in the boat when I go solo :lol:

Posted

Cant be under prepared. Don't even want to say how many rods I carry on boat. Just added 8 more lead cores. Have to figure out rod storage for cuddy before spring.

Sent from my iPhone using Lake Ontario United

Posted

That's my problem I have 12 in racks (6 on each side) then my cope and core goes under floor so they don't get kicked around

Posted

I carry 3 Heartlands 8s and a Shimano 7.  Each with a Penn 320GT2.  That's more than enough for me. (I don't run lead or copper)

 

Tom B.

(LongLine)

Posted

I don't have any pics at this point as the boat is wrapped up. But the rod holders I have were stock with the boat and fold out of the way when I am not using them. I also just got an overhead rods storage rack for the cuddy that will allow me the store 10 more rods

Posted

Here is a pic of what I am gonna add to the cuddy this year but I am concerned about head clearance

post-155451-0-32555600-1420417525_thumb.jpg

Posted

Yah but in a tournament I don't want my guys on the rod all day that's why I use medheavy

Posted

I carry 25 or 26 rods in the cuddy at all times, even though I seldom run more than 6 at one time.  Gotta have all the bases covered :lol: :lol:

Posted

Here is a pic of what I am gonna add to the cuddy this year but I am concerned about head clearance

The rods will bounce out of those.  Go with the berkley locking rod holders.  I have them on the ceiling of my cuddy and it is perfect. 

Posted (edited)

As for rods, I run the following:

riggers - ( 8 ) 8 1/2' Daiwa Heartlands

Plainer rods - ( 8 ) 7 1/2' Daiwa Heartlands

Divers - (2) 8 1/2' Okuma Blue Diamond roller rods and (2)10' Okuma Blue Diamond roller rods

Copper - ( 8 ) Gander Mountain Guide Series 8' Leadcore rods

Leadcore (1) - Gander Mountain Guide Series 8' Leadcore Rods

Slide Divers (2) 9' Daiwa Heartland Diver rods

Edited by GAMBLER
Posted

Geez....I'm feeling better already ..... I should show this to my wife :lol: it makes me look almost "normal"  :) 

Posted

Geez....I'm feeling better already ..... I should show this to my wife :lol: it makes me look almost "normal"  :)

They are just the tools of the trade.  You have to be ready for what ever conditions Lake Ontario throws at you! 

Posted (edited)

Here is a pic of what I am gonna add to the cuddy this year but I am concerned about head clearance

I tried that in my cuddy , a 19 foot Islander, and it sucked. They are too close together and you have no room  for rods with reels on them.

My solution is more practical and much cheaper. 1 1/2 and 2 inch electric conduit  hangers (the grey plastic ones) screwed onto 2  three quarter inch by three inch wide boards  and the boards screwed into the ceiling of the cuddy. one side for the butts and the other for the tips.The rods in alternating direction.

I have one set for the ceiling of the cuddy and two more sets for the sides which are set up vertically along the sides. For the ones on the side I cut the top third of the hangers off to make it easier to place and remove the rods.

This way, I have storage space for 20 rods with reels on, including leadcore and copper, all on the sides and the ceiling while leaving the cuddy  center open for additional gear and optional porta potty.

It took some measuring,but because I made it myself I could space them the way I needed them.

The cost of this setup was 5 dollars in materials.

Edited by rolmops
Posted (edited)

I carry 25 or 26 rods in the cuddy at all times, even though I seldom run more than 6 at one time.  Gotta have all the bases covered :lol: :lol:

Yes, you have to be ready for when you are really, really far from shore :lol::P :-P :party: :party:  8) :cool:

Edited by rolmops
Posted (edited)

This thread made me curious to inventory all my big lake stuff...31 set-ups. It'll be painful to add up this total investment in rod/reel set-ups, as I bought everything new.  Plus don't want to leave any evidence around for the wife to see. haha  This stuff should last a LONG time though... 

 

Planer Boards (Qty 8 - Target: Walleye) - Ugly Stik L 8' 3" Rods, Daiwa SG27LC3B Reels, 10lb Big Game, 10lb Seaguar Fluro

 

Planer Boards/Downriggers (Qty 4 - Target: Walleye/Browns) - Ugly Stik L 8' 3" Rods, Abu Garcia Ambassadeur 6500LC Reels, 12lb Big Game, 12lb Seaguar Fluoro

 

Downriggers (Qty 4 - Target: Walleye/Browns) - Ugly Stik L 7' Rods, Abu Garcia Ambassadeur 6500LC Reels, 12lb Big Game, 12lb Seaguar Fluoro

 

Short Leadcores (3,4,5,6) (Qty 4 - Target: Browns/Steelhead) - Okuma Classic Pro GLT 7' 6" ML Rods, Daiwa Saltist High Speed 30/40 Reels, 20lb Big Game Backer, 18lb Leadcore, 12lb Seaguar Fluoro

 

Long Leadcore (10) (Qty 1 - Target: Salmon/Steelhead) - Okuma Classic Pro GLT 7' 6" M Rod, Daiwa Seagate High Speed 50 Reel, 20lb Big Game Backer, 27lb Leadcore, 20lb Seaguar Fluoro

 

Downrigger (Qty 4 - Target: Salmon/Steelhead) - Okuma Blue Diamond 8' 6" M Rod, Daiwa Saltist High Speed 30LC Reels, 20lb P-line CXX, 20lb Seaguar Fluoro

 

Dipsey (Qty 2 - Target: Salmon/Steelhead) - Okuma Classic Pro GLT 9' M Rod, Daiwa Saltist High Speed 40LC Reels, Torpedo 19-strand wire

 

Dipsey (Qty 2 - Target: Salmon/Steelhead) - Okuma Classic Pro GLT 10' 6" M Rod, Daiwa Saltist High Speed 40LC Reels, Torpedo 19-strand wire

 

Copper (Qty 1 - Target: Salmon) - Okuma Classic Pro GLT 8' 6" Copper Rod, Daiwa Saltist High Speed 50LC Reel, 50# PP Backer, 45lb Blood Run Copper, 30lb Seaguar Fluoro

 

Copper (Qty 1 - Target: Salmon) - Okuma Classic Pro GLT 8' 6" Copper Rod, Daiwa Seagate High Speed 60 Reel, 50# PP Backer, 45lb Blood Run Copper, 30lb Seaguar Fluoro

Edited by FleetTracker

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...