Stacker sticker

[Jeremy Goodison]

Wondering if any one has tried these. Their free slider clips meant to improve hookups by keeping more tension than just a normal swivel. Seems like a great idea so I bought a pack to try. Wondering if anyone has any tips before I send them out. Made by Michigan stinger Thanx

Sent from my XT1254 using Lake Ontario United mobile app

[EKoselny]

I have tried them but ran into a problem with them getting hung up on my uni to uni knot from my 30lbs main line to 20 lbs leader. 

[Jeremy Goodison]

Makes sense . I don't leader down my rods so I'll miss that issue

Sent from my XT1254 using Lake Ontario United mobile app

[Xxx]

Sweet, where did you find them?

[Jeremy Goodison]

I get the Michigan stinger product catalog. It is pretty ingenious. I cut a slit in the rubber and you have a fixed. Worst case scenario is you have a free slider. I'm swimming then tonight so I'll be able to see on the sonar of it sits still on my line

Sent from my XT1254 using Lake Ontario United mobile app

[Jeremy Goodison]

They work mint. Tried them out Saturday. They sta like a fixed slider ( watch for them as you raise the Rigger up). But they stayed where I set them

Sent from my XT1254 using Lake Ontario United mobile app

[Gill-T]

Those type of products can be reproduced by dipping a clasp in liquid tool rubberized and letting it harden.  Make a slit in the rubber for your main line to fit into.  

[Xxx]

Those type of products can be reproduced by dipping a clasp in liquid tool rubberized and letting it harden.  Make a slit in the rubber for your main line to fit into.

That's a pretty ingenuous idea. Like the liquid black tape, then just cut a small slit, like you mentioned!!! Sweet, Thanks a lot for sharing your thoughts!!

[Xxx]

ops.

Edited May 28, 2015 by pap

[vetting]

So can someone explain in detail how to set this up with doing the rubberized trick?

[Gill-T]

Look at the picture at the top.  You dip half of the clasp in the material and let it harden.  Once hardened you take a razor blade and slice a slit in the material. 

[Jeremy Goodison]

Not that you can't get Maguiver on this to create the same effect. If you looked at one closely the "rubber" in the middle is thick. If you dipped a swivel in liquid rubber it would not be near as good on the holding power to the main line (nor wood it last as long). I can't remember how much (maybe 4 for $6) better to buy a pack then if you loved the idea make your own.

Sent from my XT1254 using Lake Ontario United mobile app