50-200 khz transducer for Lowrance xlc 38c hd

[Patriot]

Anyone know if lowrance makes a 50-200 kHz transducer for Lowrance xlc 38c hd? The td I have has the narrow beam

[Justafisherman519]

http://support.lowrance.com/system/selfservice.controller?CONFIGURATION=1001&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=2894

Sent from my SM-N910V using Lake Ontario United mobile app

[GAMBLER]

They do. I put one in this year for the same unit. I found mine at the GPS store. It was $99.00.

[Patriot]

I guess what I should have asked first, was a dual beam 50-200 kHz transducer sold with the unit? Seems we can only get the 200 to work. Maybe I'm ding something wrong.

 

Thank you for your help guys

 

Greg

[GAMBLER]

You have to go into the settings menu and select it.

[Lund SSS]

I'll often run both frequencies on split screen when rigging deep ( past 80' ) the 50 Hz read the weights and the stacked releases with unbelievable detail.  Tweeking of the settings is usually needed

[Patriot]

My wife read the manual on our way home from the lake and found the correct way to set it up.

Thanks guys

[Patriot]

Got the 50khz to work but only reads 3.5 feet. Not sure what's up yet

[Rich s]

Make sure your depth setting is in auto. When I first used mine I had the depth set manually at 200' and the unit wouldn't read shallow water correct

[Andre wallyandre]

I suspect that you have a 83/200

To find out about the one youre running just check near the blue connector on the transducer cable there is a aluminium label with the model written on it. If you read HST-WSBL it is a 83/200

Edited July 19, 2015 by wallyandre

[Rich s]

I have 50/200 transducer

[Patriot]

We figured out what the problem was. The sensitivity was set too high. It works perfect now! Yeh.