Big Jon rigger problem

[cooter dog]

Hello does any know how to fix my rigger it keeps popping the breaker on the way up,I only run 10 lbs ball don't thing that the problem .Any one know where i should i start to look thanks Guys

 

[Steve.e]

Could be a faulty breaker or your motor drawing too much current due to resistance (motor straining to turn the pulley) Does the motor seem to be turning at the correct speed? Also may be motor is bad. Any starter rebuild shop can rebuild it . I had one fixed for 55 bucks at Golden Alternator.

[skipper19]

Check all connection, be sure to use proper wire guage, those will cause low voltage, high amp draw. Check the breaker next. Swap it with one working. See what happens. It still pops, gotta be motor on the rigger issue. Bad brushes or commutator. Sometimes can clean them up if not worn will make a difference.

Sent from my SM-N900P using Lake Ontario United mobile app