Trim pump

[stoneam2006]

Ok so my trim motor quit but to diagnose I took entire pump out and checked over. Now I have replaced the motor and am ready to install. When I disconnected the lines I noticed the outdrive was lowering (duh) so quickly tied it up to prevent the lines from emptying. My question is do I need to bleed the system some of what I have read says no it will do it its self. Figured I'd ask here. Pic of pump unit (off google)

 

Sent from my SM-N920V using Tapatalk

 

 

[Bozeman Bob]

it will bleed itself.

[stoneam2006]

Thanks guys

Sent from my SM-N920V using Tapatalk

[bluegiller]

Thanks guys

Sent from my SM-N920V using Tapatalk

I did mine on my outboard and it took a while of putting it up and filling it and putting it up and down a few times but it did bleed it self just was a slow process


Sent from my XT1585 using Lake Ontario United mobile app

[stoneam2006]

As long as it will do it in happy to hear

Sent from my SM-N920V using Tapatalk

[fisherdude]

remember to fill the reservoir tank with the lower unit in the down position .  

[stoneam2006]

Will do

Sent from my SM-N920V using Tapatalk