Marine vinyl floor

[Zinger11]

Can this be applied to a fiberglass floor and if so what's the best adhesive thanks

 

Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

 

 

[Knotlost Charters]

Your going to have a hard time getting glue to adhere for very long. You can buy a paint that almost mimics vinyl flooring. It will stick real well to it.


Sent from my iPhone using Lake Ontario United

[stoneam2006]

I did the viynil floor in my last boat they make marine glue for it also kind of pricey. 1 thing I will say is you don't want to have seams or corners/ends available to be scuffed up as it will peel it up. I was going to run 1/4 round plastic bathroom molding around the edge if mine to keep it stuck tight. Otherwise if you can wrap around the edges

Sent from my SM-N920V using Tapatalk

[TileMan Dan]

Why do you want to do this? Glass is easier to keep clean.


Sent from my iPhone using Lake Ontario United

[Zinger11]

Why do you want to do this? Glass is easier to keep clean.


Sent from my iPhone using Lake Ontario United

If I was fiberglass it I would never get the gel coat non slip

Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

[TileMan Dan]

If I was fiberglass it I would never get the gel coat non slip

Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

Just need to add pumice to it when mixing in catalyst.


Sent from my iPhone using Lake Ontario United mobile app

[Knotlost Charters]

It's very hard to keep floors lasting, the best method is to use a good two part paint with some pumice. Fiberglass will absorb water, even gel coat eventually. There is a lot of misinformation out there. There are many paint products that look as good (in my opinion better) as gel coat, and they are waterproof. Look into the epoxy stuff, but linoleum is awful as water can get under it and you will never know.

[Tradman]

I coated  the floor on my 26 Penn Yan with Kiwi Grip, couldn't be happier, no peeling, scrubs up decent and you can recoat it easily, initial cost was about $200 , looks like about half that amount to freshen it up with another lite coat. I didn't use the roller that came with it, used Dry lock waterproofing  paint blue foam rollers which produced a lighter texture

[coldtrailer]

I used the Kiwi Grip too...couldn't be easier and you can set the texture with type of roller used.