Panther Kicker Mounts

[Jager]

Looking at the possible options available from Panther to mount a 9.9 hp 4 Stroke Kicker Motor. Anyone have/use them? Opinions?

Thanks-Mike

 

 

Sent from my iPhone using Lake Ontario United mobile app

[CK3080]

I have this one:

 

http://www.discountmarinesupplies.com/Motor_Mounts_Accessory-Panther_550027_Fixed_Outboard_Motor_Bracket.html?gclid=CjwKCAjwwPfVBRBiEiwAdkM0HewzfBw6hiQIJ9T0--C2ZEWz0WRA3nL98cXsDleVFM_qsgdLMMvcphoCyqMQAvD_BwE

 

I wanted a fixed position bracket for a heavy T9.9.  This one has a few different holes to set the kicker higher or lower to work with your transom.  My wellcraft has more a euro transom, so this worked well.  If you have a straight transom, I dont think this still would work, as there is not much set back.  I dont have a great pic of it, but this will give you an idea.

[Jager]

Thanks CK! That looks quite solid. I in fact, an going with the same motor T9.9 Long Shaft. The link for the mount shows it has a 13” set back which I would think would work for my 21’ Hydrasports WA with a straight transom. My only potential issue is being able to clear my trim Tab. Did you also install the mount with a backer plate as well? 

Thanks

Mike

 

[CK3080]

Yessir on the backer plate.  I used a piece of 4" x 8" or so 1/4" aluminum stock .

 

I dont have trim tabs, but this bracket would definitely get in the way of them.  Before I bought it, I did find this thread on another board from a guy with a similar boat to mine and his trim tab fix with the same bracket.  If I ever did get tabs, I would have to go this route.  Bracket is unique in that its two piece, so the trim tab ram can be installed inside the bracket.

 

 https://keywestboatsforum.com/kicker-mount-211-dc-2020dc-t2489.html

[Jager]

Just checked out that link and I see what you mean as far as trim tab clearance. This mount will Def not work in my case. I see that Panther makes a fixed mount for 4 Stroke kickers for up to 35 hp that appears to have a decent amount of set back. Perhaps that would be the better option to clear my tab. 

Thanks

Mike

 

https://www.iboats.com/shop/panther-fixed-mount-4-stroke-outboard-motor-bracket-up-to-35hp.html?cm_mmc=&gclid=CjwKCAjwwPfVBRBiEiwAdkM0HeBUGKUEQdIsDx5paq27nT-NJk5aRYvFstutQgMQ17BHeMEbR8Dk0hoCn0gQAvD_BwE

 

 

Edited March 30, 2018 by mrk61

[L&M]

Adventure makes a good fixed mount too

https://adventuremarine.ca/product/high-thrust-outboard-motor-bracket/

[BottomDollar]

I've got that same Panther fixed bracket due to my transom shape and not wanting another folding bracket. It's solid and plenty of clearance when the kicker is tilted up while under way.

 

 

Edit: sorry, just saw that you need more setback. That one you linked to should work well for that.

Edited March 30, 2018 by BottomDollar

[fisherdude]

i set my boat with a panther kicker bracket . it is rated for a 35 horse four stroke my kicker is a 8 horse tohatsu . i broke the backing pad . i made my own backing pad out of 1/4 aluminum and 1 3/4 oak . panther did replace the backing pad but don't trust it           

[Jager]

Thank you everyone who replied, very much appreciated! 

 

Mike

[lakebound88]

I have one of these mounts. A fixed mount rated for well above what you have.

Sent from my SM-G950U using Lake Ontario United mobile app

[dgfidler]

I have that mount. I couldn’t tilt my motor. I’ll give it to you for shipping cost if you want to try it. I went with the lift bracket once I realized the tilt issue


Sent from my iPhone using Lake Ontario United

[dgfidler]

Just measured the set back at 10in. I don’t think it will work on a straight transom. I have 08 Yamaha F15.


Sent from my iPhone using Lake Ontario United

[dgfidler]

I can vouch for the Panther 55-0416. Very sturdy and functional bracket


Sent from my iPhone using Lake Ontario United