Jump to content

Recommended Posts

Posted

 

Genuine Mercury Mercruiser OEM Alpha One Gen 2 CPO 2.00 Sterndrive 5121600TS

 
 

 

$2,874.00

 

 

*****  PLEASE NOTE THERE  IS  NO  WARRANTY  *****

NEW, in the box, Alpha 1 Gen II sterndrive from MerCruiser, part number 5121600TS  /   5121600TP

MerCruiser Alpha Gen II sterndrives are a newer model and have some different features. The Alpha Gen II upper and lower housings are fastened together with two through bolts on either side of the drive (along with the front and rear bolts). Alpha One drives, on the other hand, use one stud visible on either side. Alpha Ones have two studs under the ventilation plate just above the prop. Alpha Gen II drives do NOT have two studs with nuts above the prop.

Please see pictures for all the parts that you will receive.

Specifications:

  • Manufacturer: Mercury MerCruiser
  • Part#: 5121600TS
  • Model: Alpha I Gen II
  • Ratio: 2.0

RELIABILITY

  • Spiral-cut steel bevel gears for quiet operation and durability
  • XK 360 low copper alloy for corrosion resistance
  • Tri-Paint System (Irridite, EDP & Powder Paint) creates a tough, durable corrosion resistant barrier
  • Armored trim lines protect hydraulic system from debris
  • Flow-Torq II Propeller Hub The Weekend Saver protects the entire drive from damage, not just the lower unit

PERFORMANCE

  • Hydrodynamic lower unit produces little drag to slice through the water efficiently
  • Trim limit switch sets drive angle for maximum performance every time
  • Through-Prop exhaust maximizes power and reduces noise levels
  • Wide range of 3-, 4-, and 5-blade propellers available in aluminum and stainless steel to maximize pulling power and top speed for any application

EASY OWNERSHIP

  • Drive Lube Monitor Alarm warns if drive lube is low. Engine mounting allows easy inspection and fill without the cost to pull a boat from the water.
  • Permalube® U-Joint Virtually no maintenance required
  • Maintenance Free Hinge Pins No added cost to pull a boat from the water
  • Greaseable Drive Coupler No added cost to pull a boat from the water
  • New permanently lubricated gimbal bearing does not require maintenance

TECHNOLOGY

  • Power Trim XD® Automatically Returns the Drive to the Water to Maintain Full Control of Boat in Case of an Emergency
  • MerCathode® kit monitors the galvanic potential of the drive and counteracts corrosion with a metered electrical charge providing continuous cathodic protection
  • Engine Guardian System® with MPI engines protects the drive from damage from low lubricant levels
Maximum Power Capacity 300 HP (221 kW)
Lower Unit Design Low-Drag Hydrodynamic Torpedo
Maximum Propeller Diameter 15"
Water Inlet Location Strut
Clutch Type Compact Dog Clutch with F-N-R
Available Gear Ratios 1.47, 1.62, 1.81, 2.00, 2.40:1
Counter-Rotation Optional, Except 2.40:1 Ratio
Upper Unit Gear Set Precision Shimmed, Spiral Bevel Gear
Lower Unit Gear Set Precision Shimmed, Spiral Bevel Gear
Propshaft Material Heat-Treated Stainless Steel
Standard Exhaust Outlet Through Propeller
Propeller Hub Type Flo-Torq II Hub
Recommended Lubricant Mercury High-Performance Gear Lube
Monitoring System Engine-Mounted Lube Monitor w/Audio Warning or Engine Guardian®
Corrosion Warranty 3-Year, Limited
Housing Construction Corrosion Resistant XK 360 Aluminum Low-Copper Alloy
Corrosion Protection Tri-Paint, Anodes & MerCathode® as a Kit
Anode Type Ultra-Pure Aluminum Anodes or Magnesium Anode Kit
Speedometer Pick-up Integrated Into Lower Housing
Steering System Single Cylinder Power Steering with Anti-Feedback
Steering Range 56° Range Stop to Stop
U-Joint Type Permalube® Virtually Maintenance-Free
Power Trim System Twin-Cylinder Hydraulic Featuring Power Trim XD® Kick-up Return
Typical Trim Range 5° to 15°
Trim Limit Switch Standard - Adjustable
Trailer Limit 53°
Trim Hinge Pin Design Permanently Lubricated - No Maintenance Required
Hydraulic Trim Lines Stainless Steel Braided Armor
Drive Coupler Greaseable From Inside Boat
Drive Weight 85 lbs. (38 kg)

 

 

Canadian buyers have to pay tax(s)  

USA buyers have to pay NO tax(s)  

USA buyers are subject to duty if the item isn't in the NAFTA ( North American Free Trade Agreement ) + taxes when item exceed $200.00 usd value ( each states is different for the tax issue ) .

 

Thks...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...