Jump to content

Track setup

White Wolf
 Share

Recommended Posts

White Wolf

White Wolf

Posted
Posted

Putting tracks on my boat and just looking for any advice or do's and don'ts anyone with experience might have before I start drilling holes. I have 4 downeast that Im looking at various adapter's for. Two S-10 and two S-17. Also, if you could only run one down rod, would you prefer it on same side or opposite of the kicker motor? Or even right in the wash?

Thanks in advance 

Ivan

Ivan

Posted
Posted

We used 1/4” aluminum backing plates on the under side of our gunwales to reinforce the track. Use bolts with lock nuts.

 

Hard to say what side id use if I only ran one wash or back rod. The other day, i fished solo and ran the back rod on the non kicker side. It did well. But I have days where the kicker side back rod was good. Hard to say if that has more to do with rod position or bait choice. Id experiment for yourself. One nice thing about track is you can run holders in different positions.

 

 

Sent from my iPhone using Lake Ontario United

 

mr 580

mr 580

Posted
Posted

Traxstech offers several mounts for the S17’s - you can buy bare adapter to use your S17 or buy with an S17 already mounted.

White Wolf

White Wolf

Posted
  • Author
Posted

AZ was my plan for the S-10s. I like the look of the Cisco mounts there because I definitely need extra height and adjustability in the back of the boat to get around my weird transom/splashwell design. I'm going to mess with some nylon washers and see if I can get the 17s to tip like the AZ. Never an issue with the rod popping out tilted straight down like that?

Chowdaire

Chowdaire

Posted
Posted

I’ve got the fat AZ’s for downrods and Cisco long cradles for outrods and boards. I love the whole setup.

No issue with the rod popping out because you just grab the rod and tilt it up toward 90 deg and pull up on it.

Don’t have a pic of the full setup but what’s so nice about the tracks is you can change the configuration based on what you want to do and how many rods you can run in a given situation.

IMG_3947.JPGIMG_3911.JPG


Sent from my iPhone using Lake Ontario United

Ivan

Ivan

Posted
Posted
AZ was my plan for the S-10s. I like the look of the Cisco mounts there because I definitely need extra height and adjustability in the back of the boat to get around my weird transom/splashwell design. I'm going to mess with some nylon washers and see if I can get the 17s to tip like the AZ. Never an issue with the rod popping out tilted straight down like that?

 Ive never had an issue with my down rods popping loose. The angle of the pressure from the pull of the lure is different than the angle of pressure required to open the holder and remove the rod. I never move the position of any of my holders to remove the rod as chowdaire mentioned. I personally prefer my holder to stay firm in one place. I tighten my Fat AZ holder as tight as they will go.

 

Cisco also makes risers in different sizes if you need even more height. The center rod in this pic is on one of their risers.

 

Adjustments.JPG

 

 

Sent from my iPhone using Lake Ontario United

 

 

Chowdaire

Chowdaire

Posted
Posted
3 minutes ago, Ivan said:

 

Ive never had an issue with my down rods popping loose. The angle of the pressure from the pull of the lure is different than the angle of pressure required to open the holder and remove the rod. I never move the position of any of my holders to remove the rod as chowdaire mentioned. I personally prefer my holder to stay firm in one place. I tighten my Fat AZ holder as tight as they will go.

 

Cisco also makes risers in different sizes if you need even more height. I should have another pic of their riser in use in my boat.

 

 

Sent from my iPhone using Lake Ontario United

 

Ha. I totally misread his comment about the rod popping out. I see it now. Thanks,

 

And yeah. I move those Fat AZ's up and down fairly often. Especially if I start banging rocks too hard  I'll just push on the butt of the rod and tilt it up a bit. Still no problems with rods popping out.

Ivan

Ivan

Posted
Posted

That is a nice feature of the Fat AZ’s, I just dont use mine that way. I like that the adjustment on them is infinite and not certain fixed positions.


Sent from my iPhone using Lake Ontario United

Nalod

Nalod

Posted
Posted

I have regular and powder coated s-10s.  I have had my down rod pop out on me twice, but noticed it happened both times on the powder coated version.  If you are not careful, the powder coated ones do not seat properly.  Once I started watching for that, I have not had a problem.

old man

old man

Posted
Posted

IMG_4015.JPGcleat was in the way so I drilled the track to match and used it for the center mount


Sent from my iPhone using Lake Ontario United

  • Like 2
  • 2 weeks later...
zach

zach

Posted
Posted

Hell musta frozen over, did I just see ole man with a trolling set up?
You'll like the set up, just make sure to tighten those holders down good first time and imprint the plastic disk into the ridges on the holder. Once they are imprinted with the grooves u can loosen a lil n start fishing. If you don't do that, holder can move on ya while fishing.
Best wishes fishing this year!

IMG_4015.thumb.JPG.a3434777bb4233f3511cc69d5bc6abe1.JPGcleat was in the way so I drilled the track to match and used it for the center mount


Sent from my iPhone using Lake Ontario United
tempFileForShare_20200509-064347_33958778730169.jpegFB_IMG_1588989398319.jpeg

Sent from my SM-G973U using Lake Ontario United mobile app

old man

old man

Posted
Posted

My hands and arms are getting old and casting all day is getting tough. I’ll cast until I can’t and switch to trolling.


Sent from my iPhone using Lake Ontario United

  • Like 3
zach

zach

Posted
Posted

Smart man, imo an angler needs to be well rounded to maximize opportunities. Best wishes bending some rods bud!

My hands and arms are getting old and casting all day is getting tough. I’ll cast until I can’t and switch to trolling.


Sent from my iPhone using Lake Ontario United


Sent from my SM-G973U using Lake Ontario United mobile app

  • Like 1
justtracytrolling

justtracytrolling

Posted
Posted

Lots of trollers... lots of casters...best guys can do both!  I like jerk trolling from area to area to give my casters a break from casting and change it up.  Usually troll a full spread at the end of the trip when guys are beat.  The ability to fish the entire water column is key and you can't do that without trolling AND casting!

  • Like 1
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...