Introducing the kicker power wires + and -- to Perko switch

[Wrestling Coach]

Main motor wired in to a Perko switch on dual batteries. Now do the kicker plus and minus piggyback at the same terminals as the main motor?

[Misdirection]

Yes, but normally only the + wires are run thru the perko.

Sent from my SM-A505U using Tapatalk

[Wrestling Coach]

Yes. Kicker positive to Perko common and kicker negative to battery negative is where I'm headed. Just looking for confirmation.

[lrg355]

Bat 1 to bat 1 term on switch, bat 2 to bat 2 on switch, all positive on boat to output of switch EXCEPT supply to automatic side of bilge pump. That goes directly to a battery. That is in case you turn off the switch the auto side of the pump continues to work. If you can't fit all pos to the output of the switch neatly, run a red battery cable to a suitable buss and hook all pos there. ALL neg can go to a single, neat negative buss.

Sent from my SM-J737V using Lake Ontario United mobile app