Jump to content

Recommended Posts

Posted (edited)

The Boat (Rodwrestler )
 
1977 42 ft Post with a complete retrofit in 2021

This boat has been designed around fishing the Great Lakes Salmon Fishery while perfecting the ideal layout for chartering to a client base that has been built over 40 years of operation. Post Yachts were manufactured in New Jersey building a highly reputable Custom Sportfish. The boat has been in fresg water on the Great Lakes since early 80,s  I’ve run the boat since 2006, taking full advantage of the opportunities offered by this large vessel. Over the years, I’ve realized the interest and demand for an open, express style boat and decided to design the perfect charter boat. We took on the undertaking with Aperoacho boats who is highly  reputable for custom projects like this.

 

 

The Boat details are:

 

 

 

Salon

-Gloss finish mahogany cabinets, doors and furniture
-Cork flooring along with teak and holly in bathroom 
-Bench seating for 6
-Dinette table

V-Berth
-2 beds
- Closet
-Large cabinet
-Small cabinet with drawers
-Large cabinet with drawers
 

Galley

-veneer countertops
-Mahogany cabinets
-Panasonic microwave
-full size LG fridge freezer
-Ample cabinet and drawer storage

 

Bridge Deck

-Helm electronics
-individual shifter and throttle controls
-Teak helm box and wheel
-Sea Deck flooring
-2 x 4 person benches
-matching vinyl seat cushions
- ample storage below bench seats
-2 x large two-level tackle centres
-2 x rigging stations/ seating
-12 x 15 fibreglass hard top aluminum piping legs

Electronics (New in 2020)

-Flush mount Garmin sv12
-Flush mount Garmin 10 inch chart plotter
-Garmin VHF radio
-Garmin Pan optics
-Garmin 24 phantom radar
-Raymarine st 60 autopilot

 

Cockpit

-12x 12 open deck
-Teak coverings
-2021 Sea Deck flooring
-2 hatches access to storage
-Main hatch access to generator
-120 chilly moose fish boxes
-Raw water washdown
-Fresh water washdown
-2 x 30 amp plug ins
-Blue/green LED below gunnel lighting
-Ample Rod holders 12 across the top
-6 long line rod holders mounted on latter framing
-Interchangeable Leaning post with Rod/Cup holders
-interchangeable Fighting Chair

 

Propulsion/Power

-Twin Crusader 454 motors rebuild in 2016
-Borg Warner velvet drive transmissions
-6.5 Onan Generator
-Xantrex 3000 inverter/charger
-5 Bank 12volt batteries for inverter
-2 units of cruise air air conditioners

-Raw water washdown pump
-2019 Battery charger
-2019 hot water heater
-2019 200 gph freshwater boat system pump

 

Fishing Equipment

-12 Daiwa Saltist on Okuma rods (Long line rods)
-6 Daiwa Saltist on Shimano Talora (Downrigger rods)
-4 new style Daiwa Saltist on Talora rods (Dipsy)
-3 Cannon Digitroll 10 Downriggers with bat wing rod holders
-2 x24 inch custom fishing solutions Tracks
-10 custom fishing solutions multi position rod holders
-2 x Big Jon planner board reels mounted on hard top legs
-2 Amish outfitter Planner boards Ample clips

-20 years of accumulation of tackle

 

This Semi Displacement hull
 

Lenth 42
Beam  15,6
Draft 3.5

 

Trolls down to 2MPH on one motor

Cruises at 20MPH 

Top Speed 26MPH
 

located on Lake Ontario In St Catherines , Canada 

 

$70,000 

rodwrestler (2).png

rw1.jpg

rw26.jpg

rw5.jpg

rw3.jpg

rw2.jpg

rw4.jpg

rw12.jpg

rw25.jpg

rw15.jpg

rw13.jpg

rw14.jpg

rw16.jpg

rw19.jpg

rw17.jpg

rw23.jpg

rw21.jpg

rw22.jpg

rw24.jpg

rw33.jpg

rw7.jpg

rw27.jpg

Edited by mobynick
add more info
  • Like 5
  • 5 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...